Need a DIY Radar Detector pwr cord

Home / the12volt's Install Bay / Miscellaneous - Off Topic / Need a DIY Radar Detector pwr cord

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

radarcontact

Copper - Posts: 54

This member has made a donation to the12volt.com. Click here for more info.

Joined: June 16, 2009

Location: Florida, United States

Posted: October 30, 2015 at 4:57 PM / IP Logged

My escort has an RJ11 port and I want to build a cord to go to either my SAE port or my powered USB port. I don't know if the USB delivers 12v or not...assuming it's 3v-5v; it powers my phone on my motorcycle. So the SAE is probably the port to use and I have SAE ends and lots of RJ11 lying around the workshop.

Anyone know which pair of wires I would use for hot and which pair for ground? Also what size inline fuse would you suggest?

Thanks as always!

// Radar //

RadarContact

Back to Top

twelveez

Member - Posts: 7

Joined: November 07, 2018

Location: Illinois, United States

Posted: November 13, 2018 at 9:55 PM / IP Logged

were you able to find one?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.