Dual Relay Setup DC Hydraulic Pump

Home / the12volt's Install Bay / Relays / Dual Relay Setup DC Hydraulic Pump

Welcome Guest :)

Members

< Prev Topic Next Topic >

mncountrydoc

Member - Posts: 1

Joined: February 28, 2023

Location: Minnesota, United States

Posted: February 28, 2023 at 8:24 PM / IP Logged

Hello. I have a Kawasaki mule with a electric over hydraulic dump bed. Father in law pulled the relays since one was bad and didn’t write where wires went, confusing to me is each of the 2 relays had 2 pins that were grounded. Also it has a 3 way switch for up and down, trying to figure out what pins I need to wire to what. I have battery power 2 wires. 4 ground plugs. 2 wires from switch and 2 wires from pump

i am an idiot

Platinum - Posts: 13,693

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: March 02, 2023 at 10:05 PM / IP Logged

https://www.the12volt.com/relays/relaydiagram4.html

https://www.the12volt.com/relays/relaydiagram48.html

https://www.the12volt.com/relays/relaydiagram49.html

One of the above links should be what you need.

Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.