the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 5706 Auxilary Outputs


Post ReplyPost New Topic
< Prev Topic Next Topic >
nolig2278 
Member - Posts: 20
Member spacespace
Joined: June 01, 2015
Location: Florida, United States
Posted: April 03, 2024 at 8:24 PM / IP Logged Link to Post Post Reply Quote nolig2278
I am trying to use one of my aux to trigger a factory relay for parking lights. The factory trigger is a ground and I was trying to use the latching setting of the viper aux but latching seems to have switched from pulse ground (default) to .5 volts + when I use the latching configuration. Does this make sense or is my viper wonky.    I was trying to avoid an extra relay (less wire mess) but if i need to then I will use an intermediate latching relay and the viper as a grnd pulse.
Mazda 6 and MX3

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer