2000 Celica clutch switch

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Celica clutch switch (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

shesaidshewas18

Copper - Posts: 96

Joined: September 24, 2004

Location: United States

Posted: September 27, 2004 at 1:59 AM / IP Logged

How do you get it off??? I used a 14mm sockect to get that bolt off around the switch, but I cant seem to slide the damn switch out! Anyone with experience got any advice?

Search for other posts by shesaidshewas18

the1alchemist

Copper - Posts: 65

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 04, 2004

Location: United States

Posted: September 27, 2004 at 8:18 AM / IP Logged

Why?

'Stereo' Mike

The Audio CARtist,LLC

9600 Balt. Ave.

College Park,MD 20740

301-474-6260

shesaidshewas18

Copper - Posts: 96

Joined: September 24, 2004

Location: United States

Posted: September 27, 2004 at 5:03 PM / IP Logged

Im installing a remote starter into the Celica. Cant start the car without the clutch depressed right?! So I want to take out the switch, and ziptie it down

jimmeezgolfvr6

Silver - Posts: 258

Joined: March 10, 2002

Location: Canada

Posted: September 27, 2004 at 9:32 PM / IP Logged

if you want to permanently by-pass the clutch so that you'll never have to step on the clutch to start the car, then look for the 2 wires that plug into that switch. one is BLACK/ white and the other is WHITE/ black. cut them both and connect them together (on the end leading to away from the switch itself).

or...if you want to retain this feature when you key-start and just want to by-pass for remote start, then connect the negative-out-on-start (sometimes called status output) to the BLACK/ white wire. good luck!

all problems can be resolved with a hammer

Search for other posts by jimmeezgolfvr6

shesaidshewas18

Copper - Posts: 96

Joined: September 24, 2004

Location: United States

Posted: September 29, 2004 at 4:03 PM / IP Logged

Im not 100% sure, but on the switch it has 1 BLACK/ white wire, and the other is BLACK / YELLOW. But correct me if Im wrong though.

shesaidshewas18

Copper - Posts: 96

Joined: September 24, 2004

Location: United States

Posted: September 29, 2004 at 10:01 PM / IP Logged

A friend and I made something out of this gold colored metal and we shaped it into a squarish square in the plastic area that holds the shifter. After we tried to solder a probe we made to make contact with the square if the shifter was is gear, we decided just to super glue it on there. Then duct taped it. We tested it, and even slammed the shifter hard mulitple times to see if it would get loose, and hooked it up to the trunk trigger of the alarm.

Id love to take pics but I have no access to a digicam. I'll try to see if I can borrow a friends to take pics, and I'll post up what we made.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Celica clutch switch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.