2023 Kia Forte LXS, Viper 5706V Alarm/Remote Start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147973
Printed Date: October 31, 2024 at 6:01 PM
Topic: 2023 Kia Forte LXS, Viper 5706V Alarm/Remote Start
Posted By: pauliep0213
Subject: 2023 Kia Forte LXS, Viper 5706V Alarm/Remote Start
Date Posted: March 23, 2024 at 6:07 AM
Hey All,
I have a 2023 Kia Forte LXS standard key. I am installing an alarm and remote start; Viper 5706V. I have the DB3 for immobilizer bypass and factory alarm. I was just wondering if anyone has the wiring info for this vehicle. I lost my access to Directechs since my friend passed away. I am MECP certified, although I have not installed anything in a while. I am now an Avionics Technician and haven't had much time to do it. I am going to probe the car this weekend, so I will add what I can here, but just wondering if anyone has it already. Especially the wiring for the DB3 to this specific vehicle. Thank you all in advance.
-------------
Myself
Replies:
Posted By: silvercivicsir
Date Posted: March 23, 2024 at 10:05 PM
how do you plan on flashing the DB3?
Posted By: pauliep0213
Date Posted: March 25, 2024 at 2:54 AM
I was hoping to find an installation shop near me that will do it for me. I never thought about it before, because I was able to do it through my friend. I didnt realize that you need to actually log in to Directechs to flash the module. I get they dont want people who are not professionals installing their products, but if I have my own XKLoader2, I should be allowed to flash myself. Hopefully a shop will let me throw them a couple bucks just to flash this DB3.
-------------
Myself
Posted By: silvercivicsir
Date Posted: March 25, 2024 at 11:55 AM
Posted By: pauliep0213
Date Posted: March 25, 2024 at 12:16 PM
Thank you. I found an installer near me who is going to program the module for me. So just to clarify... the DB3 says it includes the locks and factory alarm and all that. So I do not need to connect anything from the lock wires on the remote start to anything? These are the only connections I need to make?
-------------
Myself
Posted By: johnny12v
Date Posted: May 11, 2024 at 8:00 PM
the db3 will do everything through the data wires. just follow what the install sheet says and as long as the module is programmed, you should be good to go.
|
