the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

How to disarm alarm with key?


Post ReplyPost New Topic
< Prev Topic Next Topic >
gshacklebolt 
Member - Posts: 2
Member spacespace
Joined: October 10, 2005
Posted: October 10, 2005 at 7:17 PM / IP Logged  
Ok my girlfriend is away at college, and she went to a party saturday night and lost her keys and the remote for her car. She has another set of keys but not another remote. Is there anything she can do to disarm her alarm or bypass it so she can use her car, just until I can get up there next weekend to fix it. If no one has any suggestions, I'm just going to have her cut the siren wire. Its a Python 871 XP....please any help is appreciated. Thanks
swamprat323 
Gold - Posts: 1,335
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: October 10, 2005 at 7:25 PM / IP Logged  
if you knwo were the valet button is and how many times you have to push the button you can disarm it.
usally it is 1 push on valet.
but open door alarm will sound trun key to ON and push the valet switch. do thsi in all 15 seconds. if alarm dont stop then you have to push the valet more tiems can be set for up 2 5 tiems
KPierson 
Platinum - Posts: 3,527
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: October 10, 2005 at 7:55 PM / IP Logged  
If she has a starter kill installed then that won't work. She will have to jump out the starter kill relay...
Good luck!
Kevin Pierson
swamprat323 
Gold - Posts: 1,335
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: October 10, 2005 at 8:02 PM / IP Logged  
damit i knew i forgot something How to disarm alarm with key? - Last Post -- posted image. if that is a RS unit just unplug the brain bu tleave in the relay pack, if just an alamr juust un hook the braiin dotn need to cut any wires
Hornshockey 
Silver - Posts: 520
Silver spacespace
Joined: January 31, 2005
Location: Texas, United States
Posted: October 11, 2005 at 3:08 AM / IP Logged  

The python 871 does have the external relay pack.  However, unless the unit is set up for passive arming, you should only have to perform the disarm procedure with the valet button once.  When the unit is disarmed the starter kill is inactive and everything will function as normal.  The only "fix" is really to buy another remote and have it programmed to the unit.

Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.
gshacklebolt 
Member - Posts: 2
Member spacespace
Joined: October 10, 2005
Posted: October 11, 2005 at 7:55 AM / IP Logged  
How many imes should she press the valet button?
Hornshockey 
Silver - Posts: 520
Silver spacespace
Joined: January 31, 2005
Location: Texas, United States
Posted: October 11, 2005 at 11:38 AM / IP Logged  
that's programmed by the installer when the system is installed. they should have told her or written it in the manual( there's a blank to fill it in) but if not; I would assume they left it at the default of 1
Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.
blazeronspokes 
Copper - Posts: 102
Copper spacespace
Joined: February 09, 2005
Location: United States
Posted: October 11, 2005 at 6:58 PM / IP Logged  

KPierson wrote:
If she has a starter kill installed then that won't work. She will have to jump out the starter kill relay...
Good luck!

even if there is a starter kill on the system it wouldn't matter if you shut off the alarm with the valet button, your disarming the alarm.

KPierson 
Platinum - Posts: 3,527
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: October 11, 2005 at 7:24 PM / IP Logged  
The original poster said that if he couldn't get the system disarmed he was just going to cut the siren wire. If he just cuts the siren wire the starter kill (if installed) will prevent him from operating the vehicle. Depending on how it was wired you may or may not have to bypass it.
Kevin Pierson

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer