2000 sonoma viper 791 xv

Home / the12volt's Install Bay / Car Security and Convenience / 2000 sonoma viper 791 xv (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Satanklawz

Member - Posts: 8

Joined: April 13, 2004

Posted: November 20, 2005 at 8:50 PM / IP Logged

Ok, I have my viper 791xv fully installed and working properly so far. I have added a door unlock solonoid to the drivers door and have used the 3 pin blue/green wire harness to wire directly to the soloniod. it says that the wires reverse polarity depending on if you are locking/unlocking. I have tested the wires with a regular test light and this appears to be true. However when I hook them up to my solonoid I get no unlock or lock action. I hooked the solonoid up to my drill battery and all is fine it will unlock and lock effortlessly. When I test the wires with my test light they are slow to light it up and seem to be providing a weak current. Any Input?

Ween

Platinum - Posts: 1,368

Joined: August 01, 2004

Location: Illinois, United States

Posted: November 20, 2005 at 9:04 PM / IP Logged

hi,

you need to use the lock/unlock outputs to trigger relays. the current capability of the module is not enough to operate a solenoid/motor directly.

https://www.the12volt.com/doorlocks/page3.asp#5w

check out the reverse polarity section.

hope this helps,

mark

webxfx

Copper - Posts: 58

Joined: November 22, 2003

Location: Canada

Posted: November 20, 2005 at 11:23 PM / IP Logged

Satanklawz wrote:

Ok, I fixed the gauge problems, The wiring information provided on this site is WRONG!!! I looked it up on another site and the info was totaly diffrent. I changed the wires and presto! I figured out that the passkey module was not the correct one and I bought the directed 555LW and am looking for info on how to wire it.

what was wrong, what did you do different?

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 sonoma viper 791 xv

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.