the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

700R4 Problem, 98 Chevrolet


Post ReplyPost New Topic
< Prev Topic Next Topic >
djv1 
Member - Posts: 42
Member spacespace
Joined: August 26, 2004
Location: Canada
Posted: January 09, 2006 at 9:24 PM / IP Logged  
I have a 98 Chevrolet with a electronic 700R4 in it and at about 100-110km/h I get a knocking sound, does anybody know what the problem maybe?
JVC deck
6.5in MB Quarts
Rockford 3001M amp
2 12in Kicker Comps
Sirus Sattilte Radio
adrianspeeder 
Copper - Posts: 53
Copper spacespace
Joined: March 01, 2005
Location: United States
Posted: January 11, 2006 at 7:54 PM / IP Logged  
Try the tranny section of www.chevytruckworld.com
Sorry, im a ford guy.
'02 F250 PSD, '97 F-150, '71 F-100, '66 F-250, '93, '92, '88, '84 Broncos
Penn State electrical engineerin' major
fingaz22 
Silver - Posts: 410
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: March 11, 2005
Location: United States
Posted: January 11, 2006 at 9:08 PM / IP Logged  

700r4"s are very commonly used in most rear wheel drive 8 cylinders.  as i've had my share and have one now in my z28. i believe they are junk as most other people do in my bussness. always having to rebuild them. thats why i have the 350 turbo on the shell waiting untill i finish the 383 block thats going in.

but i believe your problem may not be in the trannie. more like rear end or u joint. but of course from the info you have posted i can't tell much.

give exact time it does it. start from stop. as you drive, give some drivablity conditions and i will see if i can help.

JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs
83malibuRida 
Member - Posts: 46
Member spacespace
Joined: January 21, 2005
Location: Georgia
Posted: January 13, 2006 at 10:59 AM / IP Logged  
as far as I  know trannies dont make knocking sounds, a possible whine but no knock. what makes you think its the trans? is it shifting slow or harder than usual? little info. I did have a friend that was having problems with the ball bearings on his front end. hope that helps
Nick Scott
djv1 
Member - Posts: 42
Member spacespace
Joined: August 26, 2004
Location: Canada
Posted: January 30, 2006 at 11:14 PM / IP Logged  
Found Out what my knocking sound was, front u-joint, fixed it but I still have a problem with hard shifting from first to 2nd gear when I hammer on it, and when I say hard shift I mean that it woould toss a salad when it shifhts, any ideas?
JVC deck
6.5in MB Quarts
Rockford 3001M amp
2 12in Kicker Comps
Sirus Sattilte Radio
fingaz22 
Silver - Posts: 410
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: March 11, 2005
Location: United States
Posted: January 31, 2006 at 9:00 AM / IP Logged  

thankx for the update on the fix.

for the new problem well sounds like the bands are starting to slip. but if it is only doing it in that order. you could try a lucas trannie fluid.

if i was you i would check the kick down cable for proper operation,like not being stuck or restricted by a bend in the cable. check for any rough spots.

JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer