First time fiberglassing

I wouldn't use Carpet . if you have it pretty smooth I would use vinyl instead. 4-15" RF T2

6-7" RF Component sets

8 Planet Audio 900d

10 Batcap800

1 250 amp alt

1 300 amp alt

2" sound deadner roof,doors,floors

Question: Did you remeber to put a little acetone in your resin/hardner mix to thin it out when you first applied it to the fleece?

No I didn't add acetone I've already ordered carpet lol, I ordered 5 sq yards of it from partsexpress.com Hopefully it'll be enough to do my amp rack and enclosure and false floor.

I went to JoAnn fabrics yesterday. I found a thin kinda carpet material that matched all the OEM panels in my trunk almost exactly. I got 2 yards ($4.99 yd) and a can of contact cement. Soaked the box in 2 good coats of cement, let it dry 45mins-1hr and wrapped the box. Work the carpet from the center out, apply heat (blow dryer/heat gun) to give the carpet a good contact with the glue, also apply heat to work out any wrinkles, creases or any edges, I did my entire box with 1 piece of carpet. It was surprisingly easy, and came out better then expected.

do you have any pics of what your box looks like right now?