the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

92 nissan maxima se Bose system


Post ReplyPost New Topic
< Prev Topic Next Topic >
gibbys 
Member - Posts: 2
Member spacespace
Joined: June 11, 2006
Location: United States
Posted: June 25, 2006 at 11:51 AM / IP Logged  
Hi guys great site ....I'm pulling my Bose system out of my car ..My question is can I use the wiring harness in the car for my new speakers? Or will the amp relays be a problem...Also what size are my door speakers?I've been told there 4 by 6's,5.25's or 4 in......Which is it can't seem to get same answer twice I plain on using the plastic amp holders and just replace speakers and bypass the amps(blown)...Thanks for any help guys....
ragingwookie 
Member - Posts: 20
Member spacespace
Joined: January 19, 2006
Location: United States
Posted: June 27, 2006 at 10:00 AM / IP Logged  
hey gibbys. first of all i have 4x6 for your front and 6x9 for the rear. also on the bose set-up...
i found that you can replace your headunit no prob but not your speakers. i am 98 percent positive you need to re wire from h/u to speakers. i have tried killing power to amps. and it never seems to work without re-wireing. its not that difficult just annoying. if anyone found it possible to use existing wiring please inform would make my life easier as well. but best of luck hope i helped
gibbys 
Member - Posts: 2
Member spacespace
Joined: June 11, 2006
Location: United States
Posted: June 27, 2006 at 1:09 PM / IP Logged  
Ragingwookie(Great Name)  Thanks so much for your help.....
pmh61 
Copper - Posts: 151
Copper spacespace
Joined: April 06, 2003
Location: United States
Posted: June 28, 2006 at 12:13 AM / IP Logged  
or you could just take off the door panels and open the bose box and take the amp out of there and use the wire that is aready there just take the amp out of there cut the plug off and extend the wire and run a new piece inside of the black box and do the same to the rest. If that make any sense. i did it and just used a wiring harness and it worked great
jayx27 
Member - Posts: 23
Member spacespace
Joined: September 17, 2004
Location: United States
Posted: June 28, 2006 at 9:15 PM / IP Logged  
yeah... what pmh said... I miss my 92 max... dont miss the bose one bit at all though...
The front speakers are an inexact size (Thanks alot bose) 4 inch round speakers with strip caulk (aka dumdum) to seal the area around the speaker worked really well for me. If you change the rear speakers try not to get any 6x9's with the goofy superhuge tweeter assembly because they wont fit right. Also, be prepared for overwhelmingly good sound from your rear and crappy sound up front.
Now that I think about it the best thing to do if you have the time and resources would be to make custom 6.5" pods for your front doors and put some nice 6.5's up front. Either way good luck.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer