Viper Alarm Secondary Unlock Wire

I have a 99 Civic Sedan with factory keyless entry I am installing a Viper 791 xv and Was wondering if I hook up both primary and secondary wires to the main unlock wire would it still first unlock the driver side door and with a second hit of the unlock button unlock the rest of the doors. There is a built in relay from the factory that allows the oem keyless entry to already do that so would it work. If not how can I wire it???

12volts white + ignition harness Starter BLACK/ white + ignition harness or Notes: In 6 pin white plug behind fuse box Second Starter Ignition BLACK / YELLOW + ignition harness Second Ignition yellow + ignition harness Third Ignition Accessory WHITE/ black + ignition harness Second Accessory Keysense Power Lock GREEN / WHITE - keyless entry module Notes: The keyless entry module is white in color, and located in the drivers kick panel. Power Unlock GREEN/ orange - keyless entry module Notes: The keyless entry module is white in color, and located in the drivers kick panel. Lock Motor WHITE/ red drivers kick panel Unlock Motor blue/red drivers kick panel Parking Lights+ RED / black keyless entry module Notes: The keyless entry module is white in color, and located in the drivers kick panel. Parking Lights- Hazards Turn Signal(L) Turn Signal(R) Reverse Light Door Trigger lt. GREEN/ red - OEM alarm plug Notes: The OEM alarm plug is to the right side of the steering column. The plug is green. Dome Supervision same as doors Trunk/Hatch Pin blue/black - OEM alarm plug Notes: The OEM alarm plug is to the right side of the steering column. The plug is green. Hood Pin Trunk/Hatch Release Power Sliding Door Factory Alarm Arm Factory Alarm Disarm Disarm No Unlock Tachometer blue test connector Notes: Drivers side fire wall under hood in a 2 pin plug Wait to start Brake Wire GREEN / WHITE + brake switch Parking Brake Horn Trigger gray - OEM alarm plug Notes: The OEM alarm plug is to the right side of the steering column. The plug is green. Memory Seat 1 Memory Seat 2 Memory Seat 3 Interface Module: Category: Immobilizer Bypass Required: No Type: N/A Part #: N/A

only the unlock relay side of the is necessary. wire this to the drivers door lock motor wire in side the door, and use the first unlock to trigger. wire the second unlock to the