the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 tacoma avic d3 wiring config

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / 05 tacoma avic d3 wiring config (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
edwin8484 
Member - Posts: 9
Member spacespace
Joined: August 12, 2007
Location: California, United States
Posted: August 12, 2007 at 5:45 PM / IP Logged  

Hi I just bout a pioneer AVIC-D3 Navigation system for my 05 Tacoma V6 ACC Cab 4x2 Auto, when I installed it I didn't connect the Pink Wired(Car Speed Signal Input) thinking I din't really needed it but after driving the truck for a little i notice the navigation gives me lots of error points, and I think its gotta do with this wire....so my question is , does anyone knows where in my truck is the speed detection circuit or to what wire I could hook this Pink wire from the D3 to my Truck?

I will really apreciate any help or lead to solve my problem!...Thanks

josh1979 
Silver - Posts: 320
Silver spacespace
Joined: July 03, 2006
Location: United States
Posted: August 12, 2007 at 7:10 PM / IP Logged  
12voltswht/blue (50A), wht/red (30A) + ignition harness
IgnitionBLACK/ red + ignition harness
Parking Lights+green + fuse box, 13 pin plug, pin 10
Parking Lights-green - headlight switch or BECU, pin 13
Notes: The Body ECU is attached to the back of the fuse box. It has a single 26 pin plug.
Headlightpink - headlight switch or BECU, pin 17
Notes: The Body ECU is attached to the back of the fuse box. It has a single 26 pin plug.
Trunk/Hatch ReleaseN/A
Power Sliding DoorN/A
Speed SensePURPLE / white fuse box, black 13 pin plug, pin 5
Notes: Also found at the ECM behind the glove box, second plug from the bottom, pin 8.
Wipersblue/black (L), blue/red (H) + windshield wiper switch
LF Window up/dnblue - blue/black A driver window switch in door
RF Window up/dnblue / YELLOW - black A driver kick, 12 pin plug, pins 2, 3
LR Window up/dnGREEN / WHITE - GREEN/ red A driver kick, 12 pin plug, pins 7, 1
RR Window up/dnGREEN/ black - green A driver kick, 12 pin plug, pins 5, 6
Sun Roof open/closeN/A
Sun Roof Limit/closeN/A
Memory Seat 1N/A
Memory Seat 2N/A
Memory Seat 3N/A
bring back the rotary phone so i dont have to press 1 to proceed in english
edwin8484 
Member - Posts: 9
Member spacespace
Joined: August 12, 2007
Location: California, United States
Posted: August 13, 2007 at 2:20 AM / IP Logged  

Ok the  digram u gave me is wrong cuz I have already found what i was looking 4 and it works....thanx though!

edwin8484 
Member - Posts: 9
Member spacespace
Joined: August 12, 2007
Location: California, United States
Posted: August 13, 2007 at 2:21 AM / IP Logged  

here is the link to my problem for anyone else that needs it

http://www.toyotanation.com/forum/t138609.html

edwin8484 
Member - Posts: 9
Member spacespace
Joined: August 12, 2007
Location: California, United States
Posted: August 13, 2007 at 2:22 AM / IP Logged  

here is also some pics

05 tacoma avic d3 wiring config - Last Post -- posted image.

edwin8484 
Member - Posts: 9
Member spacespace
Joined: August 12, 2007
Location: California, United States
Posted: August 13, 2007 at 2:22 AM / IP Logged  
05 tacoma avic d3 wiring config - Last Post -- posted image.
edwin8484 
Member - Posts: 9
Member spacespace
Joined: August 12, 2007
Location: California, United States
Posted: August 13, 2007 at 2:25 AM / IP Logged  

for reverse back-up camera use this wire

05 tacoma avic d3 wiring config - Last Post -- posted image.

edwin8484 
Member - Posts: 9
Member spacespace
Joined: August 12, 2007
Location: California, United States
Posted: August 13, 2007 at 2:26 AM / IP Logged  
05 tacoma avic d3 wiring config - Last Post -- posted image.
edwin8484 
Member - Posts: 9
Member spacespace
Joined: August 12, 2007
Location: California, United States
Posted: August 13, 2007 at 2:28 AM / IP Logged  

visit the web site I provided for better information on where to find the ECU and where to find the reverse back-up light wire.......Enjoy!

josh1979 
Silver - Posts: 320
Silver spacespace
Joined: July 03, 2006
Location: United States
Posted: August 14, 2007 at 5:14 PM / IP Logged  
edwin8484 wrote:

Ok the  digram u gave me is wrong cuz I have already found what i was looking 4 and it works....thanx though!

ok the wiring was not wrong  your pic shows the same wire

bring back the rotary phone so i dont have to press 1 to proceed in english

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer