727t 2005 altima
Welcome Guest :)
stx-di
Member -
Posts: 19
Joined: January 01, 2008
Location: New York, United States
Posted: February 29, 2008 at 6:19 PM / IP Logged
I am looking to install a 727t into an 2005 altima. Can anyone help with what wire to connect to what wire in the car. The car has a keyless entry in it. There is no factory alarm installed that is why I want to install the 727t.
Kurt
Mike M2
Platinum -
Posts: 2,652
Joined: June 29, 2005
Location: United States
Posted: February 29, 2008 at 8:35 PM / IP Logged
Check the database here on this site....
Mike M2
Tech Manager
CS Dealer Services
caraudio904
Copper -
Posts: 115
Joined: August 30, 2006
Location: United States
Posted: March 05, 2008 at 11:57 AM / IP Logged
| MODEL | YEAR(S) |
| ALTIMA | 2005 -2006 |
| KEY | T-HARNESS | IMMOBILIZER |
| N/A | N/A | NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM, Requires 791 Bypass Module and extra Ignition Key |
| PART | COLOR | LOCATION |
| 12 VOLT CONSTANT | GREEN (+) | IGNITION SWITCH HARNESS |
| STARTER | BLACK/ RED (+) See NOTE *1 | IGNITION SWITCH HARNESS |
| STARTER 2 | BLACK / YELLOW (+) See NOTE *1 | IGNITION SWITCH HARNESS |
| IGNITION 1 | BLACK/ RED (+) | IGNITION SWITCH HARNESS |
| IGNITION 2 | N/A | |
| IGNITION 3 | N/A | |
| ACCESSORY /HEATER BLOWER 1 | RED (+) | IGNITION SWITCH HARNESS |
| ACCESSORY /HEATER BLOWER 2 | WHITE/ BLUE (+) | IGNITION SWITCH HARNESS |
| KEYSENSE | N/A | |
| PARKING LIGHTS ( - ) | N/A | |
| PARKING LIGHTS ( + ) | RED / BLUE (+) | IN DRIVERS SIDE KICK PANEL, HARNESS TO REAR OF VEHICLE |
| POWER LOCK | BROWN (TYPE B) See NOTE *2 | IN PIN 45, @ BCM RIGHT OF FUSEBOX |
| POWER UNLOCK | PINK (TYPE B) See NOTE *2 | IN PIN 46, @ BCM RIGHT OF FUSEBOX |
| DOOR TRIGGER | See NOTE *3 | @ BCM, RIGHT OF THE FUSEBOX |
| DOMELIGHT SUPERVISION | LIGHT BLUE (-) | @ BCM, RIGHT OF THE FUSEBOX, PIN 47 |
| TRUNK RELEASE | RED / BLACK (-) or BLUE/RED (-) | IN PIN 30, @ BCM, RIGHT OF FUSEBOX |
| SLIDING POWER DOOR | N/A | |
| HORN | GREEN / WHITE (-) | @ STEERING COLUMN HANRESS |
| TACH | ANY WIRE NOT RED,PINK,or BLACK | @ ANY IGNITION COIL |
| WAIT TO START LIGHT | N/A | |
| BRAKE | RED / GREEN (+) | @ SWITCH ABOVE BRAKE PEDAL |
| FACTORY ALARM DISARM | WHITE/ BLUE (-) See NOTE *4 | IN PIN 5, @ MODULE IN DRIVERS DOOR |
| ANTI-THEFT | TRANSPONDER ANTI-THEFT SYSTEM, REQUIRES 791 BYPASS MODULE AND EXTRA IGNITION KEY | TRANSPONDER @ IGNITION SWITCH TUMBLER |
| EXTRA INFORMATION |
| NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold. NOTE *2 TEST THESE WIRES WHILE TURNING KEY IN DRIVERS DOOR CYLINDER. NOTE *3 THE LEFT FRONT DOOR TRIGGER IS LIGHT BLUE(-) IN PIN 47. THE RIGHT FRONT DOOR TRIGGER IS PINK/BLUE(-) IN PIN 12. THE LEFT REAR DOOR TRIGGER IS RED / BLACK(-) IN PIN 48. THE RIGHT REAR DOOR TRIGGER IS RED / WHITE(-) IN PIN 13. WHEN CONNECTING TO AN ALARM SYSTEM, USE ALL 4 DOOR TRIGGER WIRES AND DIODE ISOLATE, TO CONNECT, SEE DIAGRAM NOTE *4 TEST THIS WIRE WHILE TURNING THE KEY IN THE DRIVERS DOOR KEY CYLINDER. |
Southern Stylez
Jacksonville, FL 32218
caraudio904
Copper -
Posts: 115
Joined: August 30, 2006
Location: United States
Posted: March 05, 2008 at 11:58 AM / IP Logged
| MODEL | YEAR(S) |
| ALTIMA | 2005 -2006 |
| KEY | T-HARNESS | IMMOBILIZER |
| N/A | N/A | NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM, Requires 791 Bypass Module and extra Ignition Key |
| PART | COLOR | LOCATION |
| 12 VOLT CONSTANT | GREEN (+) | IGNITION SWITCH HARNESS |
| STARTER | BLACK/ RED (+) See NOTE *1 | IGNITION SWITCH HARNESS |
| STARTER 2 | BLACK / YELLOW (+) See NOTE *1 | IGNITION SWITCH HARNESS |
| IGNITION 1 | BLACK/ RED (+) | IGNITION SWITCH HARNESS |
| IGNITION 2 | N/A | |
| IGNITION 3 | N/A | |
| ACCESSORY /HEATER BLOWER 1 | RED (+) | IGNITION SWITCH HARNESS |
| ACCESSORY /HEATER BLOWER 2 | WHITE/ BLUE (+) | IGNITION SWITCH HARNESS |
| KEYSENSE | N/A | |
| PARKING LIGHTS ( - ) | N/A | |
| PARKING LIGHTS ( + ) | RED / BLUE (+) | IN DRIVERS SIDE KICK PANEL, HARNESS TO REAR OF VEHICLE |
| POWER LOCK | BROWN (TYPE B) See NOTE *2 | IN PIN 45, @ BCM RIGHT OF FUSEBOX |
| POWER UNLOCK | PINK (TYPE B) See NOTE *2 | IN PIN 46, @ BCM RIGHT OF FUSEBOX |
| DOOR TRIGGER | See NOTE *3 | @ BCM, RIGHT OF THE FUSEBOX |
| DOMELIGHT SUPERVISION | LIGHT BLUE (-) | @ BCM, RIGHT OF THE FUSEBOX, PIN 47 |
| TRUNK RELEASE | RED / BLACK (-) or BLUE/RED (-) | IN PIN 30, @ BCM, RIGHT OF FUSEBOX |
| SLIDING POWER DOOR | N/A | |
| HORN | GREEN / WHITE (-) | @ STEERING COLUMN HANRESS |
| TACH | ANY WIRE NOT RED,PINK,or BLACK | @ ANY IGNITION COIL |
| WAIT TO START LIGHT | N/A | |
| BRAKE | RED / GREEN (+) | @ SWITCH ABOVE BRAKE PEDAL |
| FACTORY ALARM DISARM | WHITE/ BLUE (-) See NOTE *4 | IN PIN 5, @ MODULE IN DRIVERS DOOR |
| ANTI-THEFT | TRANSPONDER ANTI-THEFT SYSTEM, REQUIRES 791 BYPASS MODULE AND EXTRA IGNITION KEY | TRANSPONDER @ IGNITION SWITCH TUMBLER |
| EXTRA INFORMATION |
| NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold. NOTE *2 TEST THESE WIRES WHILE TURNING KEY IN DRIVERS DOOR CYLINDER. NOTE *3 THE LEFT FRONT DOOR TRIGGER IS LIGHT BLUE(-) IN PIN 47. THE RIGHT FRONT DOOR TRIGGER IS PINK/BLUE(-) IN PIN 12. THE LEFT REAR DOOR TRIGGER IS RED / BLACK(-) IN PIN 48. THE RIGHT REAR DOOR TRIGGER IS RED / WHITE(-) IN PIN 13. WHEN CONNECTING TO AN ALARM SYSTEM, USE ALL 4 DOOR TRIGGER WIRES AND DIODE ISOLATE, TO CONNECT, SEE DIAGRAM NOTE *4 TEST THIS WIRE WHILE TURNING THE KEY IN THE DRIVERS DOOR KEY CYLINDER. |
Southern Stylez
Jacksonville, FL 32218
caraudio904
Copper -
Posts: 115
Joined: August 30, 2006
Location: United States
Posted: March 05, 2008 at 11:59 AM / IP Logged
Follow the12volt.com
Thursday, October 31, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
Topic Closed)
Members
Search
Register
Login
Printable version
