car won’t start, viper 5701

Home / the12volt's Install Bay / Car Security and Convenience / car won’t start, viper 5701 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 18, 2011 at 12:16 PM / IP Logged

Look again at what KP and I posted on the 30th. and 31st. of May.

Then add it what Kreg just posted, do you see what we are getting at?

Back to Top

delta333

Member - Posts: 13

Joined: May 30, 2011

Location: Texas, United States

Posted: June 18, 2011 at 12:26 PM / IP Logged

Well i tested the starter relay with an ohm meter and got 0.6 ohms with no power going to the unit. I have tried to put the alarm in auto mode but if it did not work I will definitely try to do that again.

Back to Top

delta333

Member - Posts: 13

Joined: May 30, 2011

Location: Texas, United States

Posted: June 20, 2011 at 8:00 PM / IP Logged

Well I'm having an odd problem trying to put it into auto mode. When I cycle the ignition on and off the alarm chirps once (don't know why) and then it doesnt matter how long I hold the valet switch it won't do anything and then once I release is it stays solid blue until I press it again. (Note this was after i came out to find the battery completely dead for an unknown reason.)

Back to Top

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: June 20, 2011 at 8:22 PM / IP Logged

Try pressing the F button twice on the remote and then press the unlock button. The solid blue light should go out. Seems to indicate the the unit is in valet mode.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

delta333

Member - Posts: 13

Joined: May 30, 2011

Location: Texas, United States

Posted: June 20, 2011 at 8:29 PM / IP Logged

Well I got out of valet mode, thanks for that. I went and put it in auto mode (or I think I did). I did everything the instructions said and it seemed like it worked but when I press the remote start button the alarm instantly buzzes and the function LED lights up, the parking lights still flash seven times as well.

Back to Top

kreg357

Platinum - Posts: 7,802

This member has been recognized as an authority in Electrical Theory. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: June 20, 2011 at 8:32 PM / IP Logged

Got the Door Trigger(s) connected? Needed for Step One of programming.

Soldering is fun!

Back to Top

delta333

Member - Posts: 13

Joined: May 30, 2011

Location: Texas, United States

Posted: June 20, 2011 at 8:47 PM / IP Logged

Yes, this is with everything connected.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

car won’t start, viper 5701

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.