viper 5101 or python 1401

Hi, I am trying to install Python 1401 remote starter/keyless entry system in my 2004 Honda Civic SE. I am not a Pro but i know i can do it. I have easily installed door lock/unlock but having issues with starter. I read in one of the forum posts that viper 5101 is similar to python 1401. i tried to follow install instruction from that as well but no success. Problem is that my Civic has Starter (+) Ignition 1 (+) (Only 1 ignition wire) Python Starter kit has (Two ignition 1 wires) Starter Output (+) Ignition 1 Input/Output (+) 12VDV Constant input for ignition 1 Relay Which one of these two ignition wires I should attach to civic? And is there any other wire that i need to connect for ignition? How does engine start without key inside ? Please and thank you.

what bypass module are you using?

connect Ign 1 (pink) to your Ign wire... Flex output not used... dont hook up the RED / white flex primary....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

I am not using bypass module yet. Is that to override the anti-theft system (If I am right)? I will do more research on it. I appreciate you answer thanks.

i have python 1401 and hyundai elantra 2008 ! can you guys help me install it ? thank you so much !Hao

haotran wrote: i have python 1401 and hyundai elantra 2008 ! can you guys help me install it ? thank you so much !

Start your own thread... Will be alot easier than answering two people in one thread...M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

And no, you can try to install it on your own thread and we might help. To the first poster you will get no further without a by-pass.

I don't have manual installation,can u show me which wire need and which no? What elese stuff I need for star? Thank you!Hao

2007 is in the Vehicle Wiring section, 1401 should be in Downloads/Manuals or go to Viper's site, support section.