So I'm getting started on the console.

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / So I'm getting started on the console. (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

TCalYen

Copper - Posts: 145

Joined: June 15, 2004

Location: Florida, United States

Posted: March 24, 2005 at 9:48 AM / IP Logged

I've gotton sidetracked with doing some body work that I should be done today. Sorry about the delay on the pictures.

whiteblazer01

Member - Posts: 43

Joined: December 04, 2004

Location: United States

Posted: April 01, 2005 at 10:57 AM / IP Logged

I noticed in the pic, you are missing your air bag. Are you putting something in there? I put the Pioneer touch screen monitor in mine and hooked it up to the avic-80 navigation unit. it was a PAIN IN THE ASS to get the cable through and be able to do U-turns! What I did was cut the data cable So I'm getting started on the console. - Page 3 -- posted image.

So I'm getting started on the console. - Page 3 -- posted image.

and I soldered all 30 wires to a 26 gauge 20-wire computer cable. But anyways, thats another topic!! Although I still had to make a glass enclosure so it would look nice!

TCalYen

Copper - Posts: 145

Joined: June 15, 2004

Location: Florida, United States

Posted: April 02, 2005 at 2:14 AM / IP Logged

Nah,

I just am painting the steering column and airbag cover. I need my airbag. One saved my life once. Seriously did...

abovestock

Copper - Posts: 247

Joined: June 08, 2005

Location: United States

Posted: June 12, 2005 at 1:25 AM / IP Logged

Air bags and seat belts rule, I would not be here todday if it was not for them. That is what happens when a drunk bitch drives home on her 21st birthday and does not which side of the road to be on. But on the topic now, looks cool good job.

TCalYen

Copper - Posts: 145

Joined: June 15, 2004

Location: Florida, United States

Posted: July 27, 2005 at 2:48 PM / IP Logged

Well I've finally started up again on the console... I had to fix the ac and do some other things which held me up a bit.

I've just finised up the wiring for two of the switch panels and will be sectioning out the main body into two pieces soon.

The hardest part is going to be getting the console to house a 10" lcd and flow from the dash into the console. Here are some pics... I'll post more later.

Oh and I got a new wheel btw...

So I'm getting started on the console. - Page 3 -- posted image.

TCalYen

Copper - Posts: 145

Joined: June 15, 2004

Location: Florida, United States

Posted: July 27, 2005 at 2:49 PM / IP Logged

pics are two large... getting them up now...

TCalYen

Copper - Posts: 145

Joined: June 15, 2004

Location: Florida, United States

Posted: July 27, 2005 at 3:00 PM / IP Logged

TCalYen

Copper - Posts: 145

Joined: June 15, 2004

Location: Florida, United States

Posted: July 27, 2005 at 3:02 PM / IP Logged

TCalYen

Copper - Posts: 145

Joined: June 15, 2004

Location: Florida, United States

Posted: July 27, 2005 at 3:02 PM / IP Logged

TCalYen

Copper - Posts: 145

Joined: June 15, 2004

Location: Florida, United States

Posted: July 27, 2005 at 3:03 PM / IP Logged

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.