Assembling check lamp canceller

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Assembling check lamp canceller (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jose pereira

Member - Posts: 4

Joined: September 28, 2006

Location: Brazil

Posted: September 28, 2006 at 5:51 PM / IP Logged

Fellows,

I am new here, and would like to receive from someone, the instructions to attach a check lamp canceller in the circuit of HID Xenon headlight.

I Know that need a resistor . The question is how many ohm and watt do I need?

The fromer bulb was 12V 55W.

The resistance of the lamp is 0.9 Ohm, mesured between poles of the lamp

I need in reality, emulate the lamp in the circuit to turn off the check lamp which appear a simbol on the instrument like a burnt lamp.

Thanks

Jose

josh1979

Silver - Posts: 320

Joined: July 03, 2006

Location: United States

Posted: September 28, 2006 at 6:56 PM / IP Logged

i just took the bulb out of my cluster very easy and quick

bring back the rotary phone so i dont have to press 1 to proceed in english

jose pereira

Member - Posts: 4

Joined: September 28, 2006

Location: Brazil

Posted: September 28, 2006 at 10:05 PM / IP Logged

josh1979 wrote:

i just took the bulb out of my cluster very easy and quick

Thank you by your answer, but looks like that you did not understand the question!

The bulb is removed!!! For this reason come up the symbol of burnt lamp at LCD screen.

I am runing the HID Xenon right now

Thanks

josh1979

Silver - Posts: 320

Joined: July 03, 2006

Location: United States

Posted: September 28, 2006 at 10:49 PM / IP Logged

i sry when i installed the hids in one of my cars my indacator for burnt head light came on that what i thought happend to you i did not catch that you had another indcator. now to your real problem i would try a 0.9 resistor in place of the bulb a standard one from radio shack should do the trick. but i have never tried to replace a bulb with a resistor before one last thing if posable relocate the bulb so it is still hooked up but you cant see it. but i see no harm comeing from the resistor

bring back the rotary phone so i dont have to press 1 to proceed in english

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Assembling check lamp canceller

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.