streetglow LED kit

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / streetglow LED kit (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

jjohn

Member - Posts: 17

Joined: October 17, 2006

Location: United States

Posted: October 30, 2006 at 9:50 AM / IP Logged

hey, i recently installed a red 15" tube in the grill of my car, i am in the process of wiring and wondering the amp pull so i know what size fuse to use or if i even need one.

does anyone know the common draw of this?

aequitasveritas

Member - Posts: 6

Joined: August 27, 2006

Location: United States

Posted: October 30, 2006 at 2:28 PM / IP Logged

easiest way is to check the fuse that came with it if it did. otherwise, read the paperwork that came with it. most of them are just around 1 or 2 amps though.

Search for other posts by aequitasveritas

jjohn

Member - Posts: 17

Joined: October 17, 2006

Location: United States

Posted: October 30, 2006 at 10:04 PM / IP Logged

i recently installed neon to a lighted switch. i have it wired directly to the battery and all that, but the light stays on. is there any way, besides wiring through a relay or the ignition coil, that the light will go off when the car is shut off?

also, the light stays lite when on or off position, any way to turn it off when switch to off position?

thanks, jordan

jjohn

Member - Posts: 17

Joined: October 17, 2006

Location: United States

Posted: October 31, 2006 at 8:18 AM / IP Logged

hey guys, i'm thinking about investing in an undercar LED multi-color kit. it seems that everyone is evenly satisfied with streetglow so i think i might go with them, plus they've got a 2 year warranty.

any other suggestions on kits??

ff-mike

Copper - Posts: 199

Joined: November 15, 2004

Location: United States

Posted: October 31, 2006 at 8:55 AM / IP Logged

#1 Take the power from your fusebox, off an ACC fed line

#2 Sounds to me that you have the power in and out lines reversed

silverado42000

Copper - Posts: 65

Joined: September 25, 2006

Location: United States

Posted: October 31, 2006 at 8:57 AM / IP Logged

FF-mike is right, sounds if you reversed the power in with out, try changing that first and see if it fixes the problem, and i would deffently use a fuse on that switch

Search for other posts by silverado42000

jjohn

Member - Posts: 17

Joined: October 17, 2006

Location: United States

Posted: October 31, 2006 at 8:59 AM / IP Logged

it's fused already, but thanks for the help, i'm at school right now so i'll try it out tonight and get back to you. thanks again,

jordan

seed854

Member - Posts: 11

Joined: October 23, 2006

Location: United States

Posted: October 31, 2006 at 9:10 AM / IP Logged

No street glow is one of the better companies out there. I have used them on several vehicles and have never had a problem.

Steve

jjohn

Member - Posts: 17

Joined: October 17, 2006

Location: United States

Posted: October 31, 2006 at 3:21 PM / IP Logged

it worked, thanks guys

bellsracer

Silver - Posts: 703

Joined: January 14, 2006

Location: United States

Posted: November 01, 2006 at 2:08 PM / IP Logged

How much are you willing to put into it? If you don't mind spending a pretty penny extra (in the area of $300-600+ depending on kit) Then a Color FX system is probably one of the best kits out there. Expandable, near infinite control on the computer, and EXTREMLY durable stuff. There was an off-roader here that had the kit installed and the only way it got damaged so far was high-siding the truck right on a module. The rest are virtually unscathed (very minimal wear considering that it's always in the mud)

If that's too much, then streetglow is a very good system to get. Very very few and rare problems.

Never send your ducks to eagle school.

The difference between ordinary and extraordinary is that little extra.

The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.