1999 Honda Prelude Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1999 Honda Prelude Alarm Information )
1999 Honda Prelude Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | White |
Ignition Switch Harness |
Starter |
Black/Red or Black/White |
Ignition Switch Harness |
Ignition |
Black/Yellow |
Ignition Switch Harness |
Ignition 2 |
White/Black |
Ignition Switch Harness |
Accessory |
Yellow |
Ignition Switch Harness |
Tach |
Blue |
Passenger's Strut Tower 2 Pin Connector |
Neutral Safety Wire |
Blue/White (-) |
Gear Select Switch |
Brake Switch |
White/Black or Green/White |
Brake Switch |
Trunk Pin |
Orange/Silver Dots |
Driver's Kick Panel |
Parking Lights |
Red/Black (+) |
Empty Slot in Fuse Panel |
Head Lamp |
Blue/Red (-) |
8 Pin Blue Connector behind Fuse Panel |
Door Trigger |
White/Black |
Driver's Kick Panel Connector bottom of Fuse Panel |
Door Lock |
Black/White |
2 Pin Gray Connector Driver's Kick Panel |
Door Unlock |
Blue/Orange |
Negative Trigger or Passenger's at Control Module |
Driver's Lock |
White/Red |
Driver's Door Boot |
Driver's Unlock |
Light Green/Red |
Driver's Door Boot |
Passenger Unlock |
Light Green/Red |
Driver's Door Kick |
Horn Wire |
Blue/Red (-) |
Steering Column |
Windows Up |
LF=Red/Blue, RF=Blue/Yellow in Door only |
Windows Down |
LF=Red/White, RF=Blue |
|
|
Follow the12volt.com
Wednesday, October 30, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.