2000 Mazda Protege Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Mazda Protege Alarm Information )
| 2000 Mazda Protege Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | Black (2) |
Ignition Switch Harness |
| Starter |
Black/Blue |
Ignition Switch Harness |
| Ignition |
Blue |
Ignition Switch Harness |
| Ignition 2 |
Black/Red |
Ignition Switch Harness |
| Accessory |
Black/White |
Ignition Switch Harness |
| Tach |
Red (AC) |
Coil Pack 1, Red/Green at Coil Pack 2 |
| Neutral Safety Wire |
Black/Blue |
PCM under Console Pin 22 |
| Brake Switch |
Green/Yellow |
Brake Switch |
| Trunk Pin |
Blue (-) |
Light in Trunk |
| Parking Lights |
Light Green/Blue |
Driver's Kick Panel or Green/Black Black Connector Steering COL |
| Head Lamp |
Red/White low |
White/Blue High at Head Light Switch |
| Door Trigger |
Black/Blue (-) |
Driver's Kick Panel or Connector above Fuse Panel |
| Door Lock |
Light Green/Red (-) |
One-Wire Locks. use 1 K Ohm Resistor for Lock Wire |
| Door Unlock |
Light Green/Red (-) |
White Connector Passenger's Kick Panel or BCM. |
| Driver's Lock |
Red |
Left Kick Panel |
| Driver's Unlock |
Blue |
Left Kick Panel |
| Passenger Unlock |
Red/Black |
Left Kick Panel |
| Horn Wire |
Black/Red (-) |
Steering Column |
| Windows Up |
LF=Red/Black, RF=Green/White, LR=Red/Green, RR=Blue/Black |
| Windows Down |
LF=Yellow/White, RF=Green/Yellow, LR=White/Green, RR=Green/Black |
|
|
Follow the12volt.com
Wednesday, October 30, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
