Battery Terminal Help!

Home / the12volt's Install Bay / Car Audio / Battery Terminal Help! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

AudioBAHNvlcm

Copper - Posts: 209

Joined: February 19, 2003

Location: United States

Posted: March 03, 2003 at 7:47 PM / IP Logged

i plan on using a new battery terminal plug (the connector thing, that hooks onto the positive post) i plan on using it for my new amp. do i cut the old starter wire and then hook it up to the new battery terminal plug, and then just use the other holes in the plug to use for my power to my amp. any help will be good. thank you Battery Terminal Help! - Last Post -- posted image.

Battery Terminal Help! - Last Post -- posted image.

bdl666

Silver - Posts: 330

Joined: December 31, 2002

Location: United States

Posted: March 04, 2003 at 1:40 AM / IP Logged

Yes that is exactly what you do but make sure that you connect all of the factory wires tha are currently conected to the battery + post. It won't hurt is you take the factory wires and wrap them all together with either tape or heat shrink tubbing. And remember to fuse the amp wire as close to the battery as possible.Also if the terminal that you are going to use have allen type screws make sure that you use the right size allen wrench because they strip really easy so take your time and find the right one.

dohcser

Member - Posts: 30

Joined: April 04, 2002

Location: United States

Posted: April 11, 2003 at 12:14 PM / IP Logged

Is there any other way around not cutting the stock terminal? Is there some sort of offset available?

esmith69

Gold - Posts: 1,511

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 26, 2002

Location: United States

Posted: April 11, 2003 at 12:43 PM / IP Logged

I can't see the image you tried to post so I don't know exactly what your situation is. Is this a GM vehicle? They do make GM battery post adapters that are specifically designed for adding a power cable for an aftermarket amplifier. Sometimes these will also work with other kinds of vehicles in addition to GM.

In all cases, you rarely need to cut any factory cables with these adapters--just unscrew the old post and remove it from the factory cable, line up the factory cable with the battery post and screw it down using the new adapter. Then you use the additional bolt on top of the adapter to secure the ring terminal of the aftermarket amplifier's power cable.

icyfingers

Member - Posts: 9

Joined: April 10, 2003

Posted: April 14, 2003 at 8:43 PM / IP Logged

i've done two installs into hondas and had to cut the factory posi. cables. But used a gold ring terminal and heat shrink tubing to clean things up. works very well, as long as you crimp the terminal tightly.

dohcser

Member - Posts: 30

Joined: April 04, 2002

Location: United States

Posted: April 15, 2003 at 6:33 AM / IP Logged

icyfingers wrote:

The problem is that I have a 2003 Nissan Maxima and it is easier said than done. The way the POS adapter is made (complicated to explain) it really is not worth me cutting it, Nissan puts an inline fuse (black box) directly on the terminal. Basically I have to try my best to keep the stock terminal.

ANY SUGGESTION!!!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Battery Terminal Help!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.