2003 acura cl oem alarm disarm

Home / the12volt's Install Bay / Car Security and Convenience / 2003 acura cl oem alarm disarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

noxiousoxide

Member - Posts: 21

Joined: April 13, 2008

Location: Oregon, United States

Posted: May 11, 2008 at 5:29 PM / IP Logged

So does that mean i gotta feed a wire into the door from the alarm brain? And where is the drivers door key cylinder in the door?

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: May 11, 2008 at 7:48 PM / IP Logged

1. Yes, you have to run a wire into the driver's door. A pain, but the door panel comes off with some ease.

2. Walk up to the car with key in hand. Unlock it without using the remote. Wires are on the inside of the door at that point.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: May 12, 2008 at 6:12 AM / IP Logged

this should help you.

https://www.the12volt.com/installbay/forum_posts.asp~TID~78731~PN~1

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: May 12, 2008 at 9:48 AM / IP Logged

Behind the glove box is the OE alarm plug that has the ignition sensor wire in it. If this wire is broken with a relay triggered with ground while running, the OE alarm will NOT KNOW

that the vehicle has been started. It's a yellow wire with silver dots. In a green plug. Cut the wire and take the BCM side to pin 30, and the OTHER side to 87a.

12v to 86, and GWR to 85.

noxiousoxide

Member - Posts: 21

Joined: April 13, 2008

Location: Oregon, United States

Posted: May 12, 2008 at 3:44 PM / IP Logged

tedmond wrote:

this should help you.

https://www.the12volt.com/installbay/forum_posts.asp~TID~78731~PN~1

I dont have a molex so its a lot easier to run the wires. But thanks though!

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 acura cl oem alarm disarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.