Horn just will not stop

Home / the12volt's Install Bay / Car Security and Convenience / Horn just will not stop (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Allen1964

Member - Posts: 19

Joined: February 20, 2003

Posted: March 22, 2003 at 8:55 PM / IP Logged

Hooked up a Vampire combo system today and I remotely started it and after a while I pressed the brake and the horn started and could not get it to stop so I had to unplug it from the module

Just before the horn started.I heard something click and I never could never get the trunk relay or power door lock relays to work.It seems as if it may be stuck in some kind of mode?

Anyone know what couldve happened

Any help would be appreaciated

thanks

CruisinS&S

Copper - Posts: 225

Joined: February 05, 2003

Location: United States

Posted: March 22, 2003 at 9:32 PM / IP Logged

car?

iskidoo

Silver - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 08, 2002

Location: Maine, United States

Posted: March 23, 2003 at 10:39 AM / IP Logged

Sounds like your connected to the horn wire instead of the brake wire. Double check all your wiring with a meter even if you have done so already. Anytime something screwy like that happens, it's almost always a wrong wire that I swore up and down I had right. Good Luck.

Allen1964

Member - Posts: 19

Joined: February 20, 2003

Posted: March 23, 2003 at 12:13 PM / IP Logged

85 Thunderbird,I re-checked all the wires

iskidoo

Silver - Posts: 1,043

Joined: December 08, 2002

Location: Maine, United States

Posted: March 23, 2003 at 12:38 PM / IP Logged

Are you using the horn as part of the alarm or is it not supposed to be connected to the system? Is the horn blowing constant or pulsing on and off as if the alarm was triggered? The alarm brake input is connected to a Green with Red stripe right?

djfearny2

Silver - Posts: 810

Joined: September 23, 2002

Location: United States

Posted: March 23, 2003 at 2:53 PM / IP Logged

reason that vampire peace of crap letme quess you baught it off of ebay or something, why waist your time and money ., that just makes me lauph

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Allen1964

Member - Posts: 19

Joined: February 20, 2003

Posted: March 23, 2003 at 3:15 PM / IP Logged

No,For the brake light,I used the solid green as it has power only when the brake is applied.The GREEN/ red has power at all times.The module has a place to hook the horn to and yes it does blow constantly when wired up

I just went and hooked up the shock sensor and moved it and the sirene didnt even go off.The park lights started flashing as if the alarm went off

Any ideas?

iskidoo

Silver - Posts: 1,043

Joined: December 08, 2002

Location: Maine, United States

Posted: March 23, 2003 at 3:20 PM / IP Logged

Are you using a relay to actuate the horn or running it directly from the alarm's output wire. If you do not use a relay for it, the horn will draw too much current from the output and stay stuck on. It only outputs about 200 mA of current that's why the relay would be neccesary. Just an idea.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Horn just will not stop

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.