clifford 50.7x problem with 2way remote

Home / the12volt's Install Bay / Car Security and Convenience / clifford 50.7x problem with 2way remote (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

renrab

Member - Posts: 4

Joined: June 21, 2009

Location: Ontario, Canada

Posted: June 21, 2009 at 8:53 AM / IP Logged

Hi, thanks for looking,

I recently installed a clifford 50.7x, I was able to program the 1way remote, arm/disarm the system, etc. When I went to program the 2way remote I can't get it into the main menu. The instructions with the clifford say to hold (f) for 8s. I hold it for 8s and nothing changes, it just flashes the transmission signals, than makes an abrupt noise and shows an X, which I read up was transmission out of range.

Any input or help with this issue would be greatly appreciated, I will be ringing out the antenna wires to ensure I didn't pinch anything during installation.

Thanks

renrab

Member - Posts: 4

Joined: June 21, 2009

Location: Ontario, Canada

Posted: June 21, 2009 at 11:05 AM / IP Logged

I checked continuity on the antenna wires everything is fine... I am at a loss for what it is.

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: June 21, 2009 at 11:58 AM / IP Logged

if your one way remote still works, i don't think the antenna would be your problem, if you try to re-program the one way remote again, do you gain access to the menu features?

renrab

Member - Posts: 4

Joined: June 21, 2009

Location: Ontario, Canada

Posted: June 21, 2009 at 12:55 PM / IP Logged

yes i can access everything from the 1way, I am wondering if I should delete all remote and try readding?

raggdout63

Member - Posts: 11

Joined: February 25, 2006

Location: United States

Posted: June 22, 2009 at 11:33 PM / IP Logged

did you get the addendum in your 50.7x telling you how to program the remotes. Both must be done one after the other. Otherwise they wont work. If you didnt get that Ill find mine and post up the instructions.

renrab

Member - Posts: 4

Joined: June 21, 2009

Location: Ontario, Canada

Posted: June 23, 2009 at 4:36 PM / IP Logged

Maybe I need to read it again but I believe I did it correctly, it mentioned nothing about adding either in a certain order or at any certain time...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford 50.7x problem with 2way remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.