2002 camry trunk release wiring

Hello,

I want to hook up the wiring so that my alarm could use the trunk release function. It works with the stock key fob. What color wires would I need to tap into? I also have a radio shack 4 pin relay, can that be used?

Thanks,

Gary.

https://www.the12volt.com/installbay/forum_posts.asp?tid=54&KW=camry+trunk+release

I have 86 and 87 hooked up to constant 12V, 85 hooked up to < size=1 face=OfficinaSans-Book>< size=1 face=OfficinaSans-Book>(-) 200mA trunk release output, and #30 hooked up to trunk release wire.

< size=1 face=OfficinaSans-Book>< size=1 face=OfficinaSans-Book> 

< size=1 face=OfficinaSans-Book>< size=1 face=OfficinaSans-Book>Thanks.

I forgot to mention the alarm that is installed is a Clifford Matrix 1x.

Thanks.

Look at the picture in the following link.  https://www.the12volt.com/installbay/forum_posts.asp?tid=88389&KW=camry+trunk+5  You will have to get a new relay.

Thanks, I understand I have to hook it up reversal style.

OK you need a 5pin rely A.K.A type 87a.

RED / white from alarm to 85,

12volt + constant with a 15amp fused supply to 87 and 86,

Release switch side of WHITE/ blue to 87a and

Trunk side of WHITE/ blue to 30.

You obviously didn't read the comments I posted on my first reply about seeing what the wire does, I think I mentioned "motor wire" which would be sitting on ground, thus blowing fuses.

I just got done with installing the relay and it now works. I just wanted to thank everyone again, this really helped me out.

Thanks.