stereo in a moped

Home / the12volt's Install Bay / Car Audio / stereo in a moped (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

algviper

Member - Posts: 1

Joined: July 23, 2010

Posted: July 23, 2010 at 3:44 PM / IP Logged

i have a honda elite moped with a 12v battery. i was wondering if i could put a 20w rms 2ch motorcycle amp on the moped.

p.s. i do have an extra battery for the moped.

Aus10ewww

icearrow6

Copper - Posts: 497

Joined: February 02, 2009

Location: California, United States

Posted: July 23, 2010 at 4:26 PM / IP Logged

i don't know what kind of battery is the one for the moped, but 20W RMS x2 channels means that the amp will need AT LEAST 40 AMPS of electrical current. If the battery can deliver this then there is no problem. Happy listening.

i am an idiot

Platinum - Posts: 13,693

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 23, 2010 at 5:02 PM / IP Logged

You will be fine. The amp you are using is more than likely just an output chip from a radio. 5 or 6 amps max.

There are no pedals on a Honda Elite. It is classified as a Scooter.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

stereo in a moped

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.