port size?

Home / the12volt's Install Bay / Car Audio / port size? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jlshea

Member - Posts: 5

Joined: October 27, 2011

Location: Nebraska, United States

Posted: October 29, 2011 at 3:13 PM / IP Logged

With a 4" PVC pipe inside diameter is 4" but outside is 4.5". Do you use the 4.5" diameter because that affects the box volume?? Using cal on this site 4"= 10.45"length 4.5"=13.7 length. The box vol is 1.75 Ft^3, Fb= 38

TK jim

Installer dad

i am an idiot

Platinum - Posts: 13,693

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: October 29, 2011 at 11:02 PM / IP Logged

Use both. Use the I.D. for the port size and length. Then you have to use the O.D. to figure out how much volume the port takes out of the box volume.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

port size?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.