turn signal/ brake light relay

Home / the12volt's Install Bay / Relays / turn signal/ brake light relay (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

brice71

Member - Posts: 2

Joined: August 22, 2014

Location: West Virginia, United States

Posted: August 22, 2014 at 8:32 PM / IP Logged

I need to know if anyone could help me narrow a brake light problem I'm having with a 1994 cutlass supreme. Here goes... I only have the left brake light coming on when I hit the brake pedal. When I turn the left signal on while holding the brake the right side brake lights up. When I go to the left signal and back to the off position both brake lights go out until I activate the turn signal again. The 3rd brake light stays on the whole time the brake pedal is depressed. Could it be the brake/turn relay or something else?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 23, 2014 at 10:23 AM / IP Logged

Measure the grounds each side, ground wire to battery should be less than 3 ohms, OR you have a bad/wrong/pins wrong way bulb.

davep.

Gold - Posts: 644

Joined: May 27, 2011

Location: California, United States

Posted: September 09, 2014 at 11:44 PM / IP Logged

I doubt this guy will be back, but he has a bad turn signal switch in the steering column.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 10, 2014 at 1:46 AM / IP Logged

Oops, sorry me trying to be clever with no specialised knowledge of that vehicle.

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: September 10, 2014 at 4:35 AM / IP Logged

LOL...

Yeah, normally a GND issue but I suspect this is a single filament combined flasher/brake bulb in which case it's a switching problem. (Or maybe a LED conversion.)

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 10, 2014 at 4:39 AM / IP Logged

It gets even more complicated post 2000 when the Germans went to symmetric pins on those bulbs.

brice71

Member - Posts: 2

Joined: August 22, 2014

Location: West Virginia, United States

Posted: September 10, 2014 at 6:18 AM / IP Logged

Thanks, I'll look to see if the bulbs are correct.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

turn signal/ brake light relay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.