2013 accord cm7200

Home / the12volt's Install Bay / Car Security and Convenience / 2013 accord cm7200 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

stroker351w

Member - Posts: 10

Joined: December 09, 2014

Location: New Hampshire, United States

Posted: December 21, 2014 at 7:14 PM / IP Logged

I have the new 7200 that I'm putting in a manual transmission accord. Everything has been installed correctly and firmware has been updated and key cloned however I'm still running into a problem. I go through the sequence needed for a manual which puts it in reservation mode however I still get 7 clicks for an error which is Reservation Mode. Also, when I get out of the car it turns off but the power doesn't completly turn off. What could be the problem?

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 21, 2014 at 8:56 PM / IP Logged

First off, when using a 7x00 series brain on a manual transmission, you MUST use the FT-DAS.

Secondly, what bypass are you using ? You require a tach, door pin, ebrake and brake signal connected to the 7200.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

stroker351w

Member - Posts: 10

Joined: December 09, 2014

Location: New Hampshire, United States

Posted: December 21, 2014 at 10:56 PM / IP Logged

I'm using the integrated blade bypass

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 21, 2014 at 11:47 PM / IP Logged

what do you mean by it turns off but not completely off? pts?

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

stroker351w

Member - Posts: 10

Joined: December 09, 2014

Location: New Hampshire, United States

Posted: December 30, 2014 at 7:34 AM / IP Logged

The car powers down once the door is shut however, it says "Power On" on the dash which means the accessory power is still on.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 30, 2014 at 7:27 PM / IP Logged

double check your PTS connection. it should power the car down completely. Ive done a few without problems.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

stroker351w

Member - Posts: 10

Joined: December 09, 2014

Location: New Hampshire, United States

Posted: January 09, 2015 at 12:11 PM / IP Logged

Do you remember what color wire the PTS was on the harness? I have the schematics but I'd like to make sure.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 09, 2015 at 4:54 PM / IP Logged

the pts wire is blue (+)

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

stroker351w

Member - Posts: 10

Joined: December 09, 2014

Location: New Hampshire, United States

Posted: January 10, 2015 at 3:55 PM / IP Logged

The car is shutting down now however when I go to RS the car nothing happens. No clicks or flashes, nothing. The lock and unlock work properly so I know the canH abd canL are correct. Generally this would mean neutral safety or something like that isn't hooked up but that's on the older remote start.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 10, 2015 at 6:33 PM / IP Logged

Snip the loop, and make sure all doors are closed. If they aren't it won't remote start

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2013 accord cm7200

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.