How do i wire these for best performance?

Home / the12volt's Install Bay / Car Audio / How do i wire these for best performance? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jstearns

Member - Posts: 20

Joined: May 23, 2003

Location: Canada

Posted: May 18, 2004 at 2:06 AM / IP Logged

Hey, I have 2 Pioneer TS-W1041DVC subs...they are 400W rms, 800W max. They are also dual voice coil (4 ohm each voice coil). I got an awesome deal on a Kenwood KAC-X810D mono amp and i am going to power them with this. The amps specs are as follows:400W rms @ 4 ohm, 1000W rms @ 1 ohm, 1600W max @ 1 ohm . I am wanting to know is how is the best way to hook these up? Should i wire each sub in parrallel then wire them in series to get a total resistance of 4 ohms? Or wire each sub in series each is 8 ohms then put them together in parrallel so the total resistance is 4 ohms? Or should i wire each sub in parrallel so they are 2 ohms each and wire them in parrallel to get a total resistance of 1 ohm? I guess what i am really wanting to know is when i take into account the total power my subs will be pulling from the amp is it going to be 800W rms (1600W max), or do i treat them as one sub and the total power pulled will be 400W rms (800W max)?

thanks

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: May 18, 2004 at 2:28 AM / IP Logged

if you wire them in 4ohm then you will get 400wrms to them, 200wrms per sub and 100wrms per coil. if you wire them at 1 ohm then you will get 1000wrms total 500wrms per sub and 250wrms per coil... all of these numbers are relative tho. im not sure about how accurate the ratings on the kenwood amps are.

Quad L Handyman services

forbidden

Platinum - Posts: 5,353

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: May 18, 2004 at 2:13 PM / IP Logged

Wire the subs like this.

Wiring Option #1

How do i wire these for best performance? - Last Post -- posted image.

Top Secret, I can tell you but then my wife will kill me.

jstearns

Member - Posts: 20

Joined: May 23, 2003

Location: Canada

Posted: May 18, 2004 at 6:58 PM / IP Logged

ok, sounds good to me. thanks guys

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

How do i wire these for best performance?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.