93 Mustang power door lock wiring

Home / the12volt's Install Bay / Car Security and Convenience / 93 Mustang power door lock wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

BeastMn37

Member - Posts: 1

Joined: September 20, 2002

Location: United States

Posted: September 20, 2002 at 6:39 PM / IP Logged

I have a 93 mustang and am trying to figure how to wire the power door lock wiring to my alarm. I have a Gargoyle CS-2003DC alarm and I know that it is a reverse polarity door lock system. I also need to know how to wire the relays. Any help would be appreciated. In my instuction manual I have 4 wires to connect. A white wire(door lock){switch side, term 87A]. A green wire(door lock output)[motor side, term 30]. A blue wire(door unlock output)[motor side, term 30. And a brown wire(door unlock)[switch side, term 87A]. How would I match that up with relay diagram. It doesn't seem to match. It looks more like the 5 wire positive door lock diagram from what the picture shows in my manual. The manual just doesn't say how to use the relays.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 20, 2002 at 7:47 PM / IP Logged

https://www.the12volt.com/doorlocks/page3.asp#arp

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

SnomanF150

Silver - Posts: 269

Joined: September 19, 2002

Location: United States

Posted: September 20, 2002 at 8:55 PM / IP Logged

you got to find the lock and unlock wires first.. pink / YELLOW for lock, pink/green for unlock... get those wires.. easiest in the kick panel or doorjam.. cut both wires and that will give you the four wires you need to get.. you will have a switch side and motor side.. the switch side will have 12v+ when you hit the switch (door locks will not work with the wires cut, duh) connect your WHITE wire to pink / YELLOW switch side, GREEN wire to pink / YELLOW motor side, BROWN wire to pink/green switch side, and BLUE wire to the pink/green motor side. these wire are from the on-board relays in the brain itself..

good luck

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

93 Mustang power door lock wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.