Remote Start 97' Ranger

Hi guys,

I know there are a lot of posts about rangers but nothing I have tried has worked. I have properly connected the starter wires through the relay along with the starter kill and ignition. I even disconnected the starter kill wire to see if that was causing my truck not to start remotely. I connected the tach wire to the tan / YELLOW wire under the hood on the drivers side. That seems fine because the alarm recognized it. I only have one acc. wire going to the acc. in the wiring harness. I have another acc. coming from the alarm but I don't know if i need it. The lights flash like they should when I press the start button, but it won't even attempt to start. I don't know what the neutral safety switch is because my ranger wiring guide doesn't give me the color scheme. Can anyone please help I have been fighting this alarm for 2 days now.

My Alarm is the Crimestopper CS-2016FM.

Thanks in Advance,

Josh

IGNITION|GREEN/ purple        |+  |ignition harness           

Here are the ignition wires you need and also, you didn't mention if the truck was a std or auto ?

Is your brake switch hooked up correctly and what wires did you tap into to get the ing?

I GOT IT! Thanks to CruisinS&S and this post a while back.  Thanks a lot bro. And thank you Velocity Motors for your support and for believing in me...lol

Anyways Appreciate the help,

Josh