Starter Kill, Diode or No Diode?

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Starter Kill, Diode or No Diode? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

just1

Member - Posts: 6

Joined: September 30, 2005

Location: United States

Posted: October 02, 2005 at 11:10 AM / IP Logged

I'm installing a Phoenix Digital alarm (PD-144) in a 1995 Toyota T100.

There is not a diode already attached to the starter kill relay that came with the alarm.

For this application...Do I need to use a diode? or Can I go without the diode?

Thanks,

just1

Back to Top

boulderguy

Silver - Posts: 510

Joined: April 17, 2005

Location: United States

Posted: October 02, 2005 at 11:35 AM / IP Logged

Just a little more information please...

Back to Top

just1

Member - Posts: 6

Joined: September 30, 2005

Location: United States

Posted: October 02, 2005 at 11:44 AM / IP Logged

Thanks for the reply.

Not sure what additional info you are looking for...something specific?

The alarm is real basic. The relay came pre-wired, but no diode.

The only thing on the truck that has power assist is the power steering. Eveything else is manual.

Thanks again,

just1

Back to Top

boulderguy

Silver - Posts: 510

Joined: April 17, 2005

Location: United States

Posted: October 02, 2005 at 11:48 AM / IP Logged

Without knowing the specific setup & wiring of the relay plus how it integrates into the starter there's no way to analyze the rigging & determine if you need a diode. Off the top of my head I'd say if it didn't come with one pre-wired & you're doing a standard setup you're probably fine. There's no real reason why you'd need one.

Back to Top

just1

Member - Posts: 6

Joined: September 30, 2005

Location: United States

Posted: October 02, 2005 at 12:26 PM / IP Logged

Here is the diagram of the relay. Hope this helps.

Starter Kill, Diode or No Diode? - Last Post -- posted image.

just1

Back to Top

boulderguy

Silver - Posts: 510

Joined: April 17, 2005

Location: United States

Posted: October 02, 2005 at 3:50 PM / IP Logged

No diode necessary.

Back to Top

just1

Member - Posts: 6

Joined: September 30, 2005

Location: United States

Posted: October 02, 2005 at 4:42 PM / IP Logged

Your help is greatly appreciated.

Thank you.

just1

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Starter Kill, Diode or No Diode?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.