2004 navigator w/navigation

Home / the12volt's Install Bay / Car Audio / 2004 navigator w/navigation (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

big sexy lac

Copper - Posts: 153

Joined: November 01, 2007

Location: Illinois, United States

Posted: December 30, 2007 at 4:50 PM / IP Logged

Sup? Can anybody help me out here I'm going install an amp. And subs to this truck there is already a speaker wire coming out of the factory sub , I figure I can connect a hi to low converter there right? But as far as the remote wire I don't know if i should go under the dash and find on acc. Wire . Or go in back of the factory radio that has navigation, I've never done 1 like this. How would I go about taking out?

Any suggestions? Does anybody have a radio diagram for this truck? Thanx

well?

Back to Top

dhawthrone

Member - Posts: 6

Joined: October 13, 2005

Posted: January 12, 2008 at 5:13 PM / IP Logged

Yes the LOC works for the subs, in the 2004 you will find the 8 inch factory sub is a DVC. I connected to an ignition wire for the remote turn on lead. Send me an email address and I'll forward a diagram.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 navigator w/navigation

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.