driver door lock problems

Home / the12volt's Install Bay / Car Security and Convenience / driver door lock problems (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Tmkaaihue

Member - Posts: 2

Joined: November 17, 2002

Location: United States

Posted: March 01, 2003 at 12:24 PM / IP Logged

i install a ultra 2500 in a 1999 chevy suburban.i got remote start to work with a dei-555l.and the locks except the driver door only.i am sure it has to do with the factory rke that needs to be disarm.they are positive three wire locks.not sure if i hook the neg disarm wire straihgt to the tan wire by the rke module or do i need a relay?

mdfauto

Member - Posts: 10

Joined: February 05, 2003

Location: United States

Posted: March 01, 2003 at 12:47 PM / IP Logged

locks are a positive pulse lt.blue

Tmkaaihue

Member - Posts: 2

Joined: November 17, 2002

Location: United States

Posted: March 01, 2003 at 2:44 PM / IP Logged

so do i need to hook up the disarm wire or not?or just hook up to lt. blue wire and program alarm to double pulse

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

driver door lock problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.