horn sounds when you unlock door

Home / the12volt's Install Bay / Car Security and Convenience / horn sounds when you unlock door (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

paf1047

Member - Posts: 6

Joined: April 20, 2008

Posted: April 20, 2008 at 8:45 PM / IP Logged

2001 kia sportage you unlock door the horn sounds put key in ignition and turn key horn stops

does anyone know how to disable this without going to dealer i don't have the time to take it in or pay for this again. it has happened before

techman93

Silver - Posts: 591

Joined: October 28, 2006

Location: Pennsylvania, United States

Posted: April 20, 2008 at 10:51 PM / IP Logged

Did you have an after market alarm installed or is it factory?

The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: April 21, 2008 at 1:43 AM / IP Logged

The alarm only disarms with the remote, or with the key in the ignition. Unlocking with the key in the door on that year and model car does not disarm the alarm - correct me if I'm wrong but that sounds like what you're doing here?

Ideally you can get a new remote and all will be well, or fix the one you have. Barring that, the only way the alarm may arm is if you push the power lock switch with the door open; it won't do it on its own.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

paf1047

Member - Posts: 6

Joined: April 20, 2008

Posted: April 21, 2008 at 10:12 PM / IP Logged

this is the stock piece of crap remoteless alarm or anti theft device that came with the car

techman93

Silver - Posts: 591

Joined: October 28, 2006

Location: Pennsylvania, United States

Posted: April 21, 2008 at 11:12 PM / IP Logged

Yeah factory alarm, it will arm when locked by remote and then only disarm with remote. If you unlock with the key in the door it will not disarm like on other vehicle factory systems like Honda, Chrysler, some Ford models. I would not use the factory system and you can put in an after market keyless that will lock and unlock without messing with the stock system. It can be made to trigger the keysense wire and that will disarm the alarm.

I would also find someone who could check if you could disable factory alarm, there might be a fuse in the fuse panel but I am not sure.

The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

paf1047

Member - Posts: 6

Joined: April 20, 2008

Posted: April 22, 2008 at 8:35 PM / IP Logged

i am trying to disable the factory alarm on the car it has no remotes never did it just uses the keys

i need to know how to permantly disable the factory alarm

i am an idiot

Platinum - Posts: 13,693

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: April 22, 2008 at 9:58 PM / IP Logged

is there a factory installed pin switch under the hood?

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: April 23, 2008 at 12:06 AM / IP Logged

According to Scytek - factory alarm module is above and to the left of the glovebox. You can unplug it, and if your power locks still work that should be the end of your problem.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

paf1047

Member - Posts: 6

Joined: April 20, 2008

Posted: April 23, 2008 at 8:47 PM / IP Logged

finaly someone that read the post completely

thank you chriswallace187

i will have to look for this

i am an idiot

Platinum - Posts: 13,693

Joined: September 21, 2006

Location: Louisiana, United States

Posted: April 23, 2008 at 10:33 PM / IP Logged

When you unplug the module mentioned earlier and a lot of things quit working, look for a factory installed pin switch under the hood and let me know if you can find it. According to the diagram I found there is a hood switch.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.