viper 690xv wont arm and disarm

Home / the12volt's Install Bay / Car Security and Convenience / viper 690xv wont arm and disarm (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

tak4

Copper - Posts: 76

Joined: January 31, 2008

Location: Hawaii, United States

Posted: May 09, 2008 at 1:46 PM / IP Logged

Hello,

I have a Viper 690XV and after working on my car one day, the alarm wont arm or disarm. There is a box looking think with a few wires coming out of it thats hanging down, that looks like it was screwed in someplace. could that be it?

I also read on google, to unplug the brain, and reprogram the remote. but i cant my manual and cant find a online guide to reprogram it.

any help?

tak4

Copper - Posts: 76

Joined: January 31, 2008

Location: Hawaii, United States

Posted: May 09, 2008 at 1:53 PM / IP Logged

I checked the website and downloaded a manual but it doesnt seem to tell me how to re program it

fcss

Copper - Posts: 92

Joined: October 09, 2007

Location: New York, United States

Posted: May 09, 2008 at 2:56 PM / IP Logged

do the doors lock and unlock without chirps or nothing at all

tak4

Copper - Posts: 76

Joined: January 31, 2008

Location: Hawaii, United States

Posted: May 12, 2008 at 5:35 PM / IP Logged

For some time now, my viper 690XV has been having no signal. I would unlock or lock it and it would just beep 6 times.

I read that i should disconnect and reconnect the brain, and reprogram the remote. i did that but since my remote has no signal i cant reprogram it.

There is a harness looking thing that i think is suppose to be screwed someplace but idk where. should i screw it to a ground?

viper 690xv wont arm and disarm -- posted image.

cmk0808ny

Copper - Posts: 203

Joined: June 02, 2007

Posted: May 12, 2008 at 5:52 PM / IP Logged

zip tie it out of the way of things

tak4

Copper - Posts: 76

Joined: January 31, 2008

Location: Hawaii, United States

Posted: May 12, 2008 at 6:02 PM / IP Logged

so it doesnt go anywhere? I thought that might be the problem.

Any way to fix the no signal problem?

cmk0808ny

Copper - Posts: 203

Joined: June 02, 2007

Posted: May 12, 2008 at 7:35 PM / IP Logged

unplug the antenna for a few mins and then reconnect. reprogram the remote. should be good after that.

tak4

Copper - Posts: 76

Joined: January 31, 2008

Location: Hawaii, United States

Posted: May 12, 2008 at 8:02 PM / IP Logged

ok ill try that now

tak4

Copper - Posts: 76

Joined: January 31, 2008

Location: Hawaii, United States

Posted: May 12, 2008 at 8:21 PM / IP Logged

its still not working, any other reason why it wont work?

techman93

Silver - Posts: 591

Joined: October 28, 2006

Location: Pennsylvania, United States

Posted: May 13, 2008 at 7:57 PM / IP Logged

Had you replaced the transmitter battery?

The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.