the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

weldwood or helmiprene


Post ReplyPost New Topic
< Prev Topic Next Topic >
dman007 
Copper - Posts: 106
Copper spacespace
Joined: November 24, 2002
Location: Florida, United States
Posted: February 27, 2009 at 9:13 AM / IP Logged  

Utterly frustrated with aerosol glues.  Finally getting a cheap spray set up and am looking for advice of which adhesive would be best.  I've read people had good experiences with both.  Both are available at yourautotrim, so I am looking if anyone had any cons to either.  It will be used for headliners, door panels, and sub boxes.  The fabric I use is 4way strech vinyl and some microsuede. Thx

DTS Performance
St Petersburg, FL
ckeeler 
Gold - Posts: 1,461
Gold spacespace
Joined: June 20, 2008
Location: New Mexico, United States
Posted: February 27, 2009 at 7:37 PM / IP Logged  
aerosol glue is for amateurs and hobbyists. get yourself a good spray gun and 3 gal pot for spraying regular old contact cement if you are going to be doing any extensive interior trim work with vinyl, suede, foam, carpet........well anything. heck even if you are just an amateurs or hobbyist, get one anyway if you want to produce anything that is at least decent and put all that spray adhesive junk behind you. the most costly portion is the gun and pot, contact cement is cheap especially if you get it 5 gallons at a time. it will more than pay for itself after a while (especially considering the outrageous cost of aerosol adhesive, which even the best most expensive of is still just half rate good at best). i only use aerosol glue for temporary things.
dman007 
Copper - Posts: 106
Copper spacespace
Joined: November 24, 2002
Location: Florida, United States
Posted: March 10, 2009 at 11:24 AM / IP Logged  
Ckeeler, I totally agree with you.  I've dumped the aerosol cans, but now I am in search for more info on adhesives and conact cement.
DTS Performance
St Petersburg, FL
ckeeler 
Gold - Posts: 1,461
Gold spacespace
Joined: June 20, 2008
Location: New Mexico, United States
Posted: March 10, 2009 at 11:52 AM / IP Logged  
i have tried weldwood before, but found contact cement just seems to work better.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer