Please help me double check my wires

Home / the12volt's Install Bay / Car Security and Convenience / Please help me double check my wires (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

victimizer8

Member - Posts: 23

Joined: March 31, 2002

Location: United States

Posted: March 24, 2003 at 12:21 AM / IP Logged

I will be installing a Automate 410 Keyless entry system. I just have one question regarding the alarm. The alarm has a Negative Output for the Parking Lights. The car i am working on is a 2003 Base model toyota tundra. Ive check this site and found a Postive and a Negative trigger for the Parking lights. The color for postive is: Green located at the Driver Kick Panel and the color for the negative is RED / Black at the steering column. So basicly i will just need to hook up the Negative output to the RED / Back wire for this car or do i need to reverse the polarity with a relay and connect the NEW postive output from the alarm to the Green located at the Driver Kick Panel? Thank You

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 24, 2003 at 5:22 AM / IP Logged

My information tells me taht the RED / BLACK wire is a (+) reverse lights wire. Test both wires prior to attaching any wires from the KE . I would use the GREEN wire in the DKP and use this diagram to Negative to Positive Relay Diagram to reverse the polarity.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

victimizer8

Member - Posts: 23

Joined: March 31, 2002

Location: United States

Posted: March 24, 2003 at 7:53 PM / IP Logged

Jeff,

i Have searched the site and thats what it tells me for a 2000 Tundra. Can you supply me with the Alarm Wiring Schematic for the Base Model 2003 Toyota Tundra truck? the wires i have are

12V - WHITE/ Red or White + @ignition harness

Ignition - Black Yellow + @ignition harness

Accessory - Blue/Red + @ignition harness

Dome SUpervision - WHITE/ Blue - @drivers door harness

Horn - GREEN/ Red - @steering column.

I will be installing the power door lock actuators, so already know where those will be.

It will help me alot if you can help me double check all these wires. Thank You.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 26, 2003 at 5:30 PM / IP Logged

Can you please email me : techsupport@velocitymotorsport.com and I will send you a file for the new 2003 Tundra ? Also let me know if it's the two door or the four door.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Please help me double check my wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.