4runner viper 5701

You guys rock. I would like  to usw the viper 5701 remotes to control the keyless entry and remote start. However, I would like the toyota factory security to remain. I know I can do this and only use the viper remotes. I dont want to carry two remotes around. Thanks Nealou812

a little more detail on the wiring diagram. park lights + foot brake + both of these wires are found in a white plug taped up if not in use somewhat above and behind the fuse box close to where the driver door grommet starts. key sense - blue connector on bottom of steering column tach    check frequency   blue plug on top left side at the right side of steering column horn      - grey connector bottom left side of the right side of steering column.

tach on most newer yotas, and lexus' can be also had at the obd2 port, usually in the corner either black or BLACK/ white. On most cars parking lights, and brake lights can be found in the kick harness goign to the rear of the car as well. or obviously at the switches.A DMM is a beautiful thing.

MECP Advanced Installer Certified.