the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

need 98 civic hatchback wiring alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
Amangill 
Member - Posts: 13
Member spacespace
Joined: March 11, 2003
Location: Canada
Posted: April 17, 2003 at 9:13 AM / IP Logged  
need the hatchback civic wiring diagram and i cant find the dome light wire/ door trigger need help too find the wire where its located? and what color is it ? A.S.A.P
aman
drvnbysound 
Silver - Posts: 289
Silver spacespace
Joined: May 06, 2002
Location: United States
Posted: April 17, 2003 at 10:01 AM / IP Logged  
The dome light wire is a Light GREEN/ Red (-) wire, its in the 24-PIN blue connector near the top of the fuse box. If you completely removed your factory radio, it will interrupt the dome light circuit, assuming that you had factory keyless entry.
drvnbysound 
Silver - Posts: 289
Silver spacespace
Joined: May 06, 2002
Location: United States
Posted: April 17, 2003 at 10:03 AM / IP Logged  
If you did have factory keyless entry, and did remove the factory radio. Jumping Pin #8 (Light GREEN/ Black) to PIN #14 (Light GREEN/ Red) will reconnect the dome light circuit.
Good luck with the alarm
AngryDomo 
Member - Posts: 1
Member spacespace
Joined: May 01, 2003
Posted: May 01, 2003 at 3:09 AM / IP Logged  
^^hello, i've just run into the same problem.  this is probably a dumb question but how do I "jump" Pin #8 to Pin #14?  Thanks for your help!
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 01, 2003 at 11:07 PM / IP Logged  
Use a small piece of wire and attach the two wires that are in those locations together with the wire. It will act as a bridge that connects the two wires.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer