viper 5902 wiring 01 civic

unplug 5902, reset srs, wait to see if srs light comes back....basically, get the car back to its original state before the srs light started coming on......other than that, not sure what else to tell ya.....including any accessories you may have installed along with the 5902.....ie: battery back up, motuion sensor, window mods, sound equipment....I hope you get the idea and good luck.do it right the first time....less warranty work=more money!:)

jstall7543 wrote: I just wanted to say that when I went to program the PKH34 it didn't work like the instructions said, I had to hold the button in and then plug in the harness and then turned the key to the on position and the light goes out, release the button. Done! I'm really happy to have remote start, now I hit it 5min before I leave work and save some freeze time! It's great! Thanks again to all that helped me out on this install!

Ive been having problems with a newly installed PKH34 as well on a 2006 Honda Civic Ex with a Viper 5101. I used w2w and did exactly as I quoted above, and this solved the problem. It seems the instructions are wrong. Instructions for this year, make and model vehicle called for: Plug in module, insert key, turn to ignition- led comes on then turns off and the module is programmed. Simple as that! Yah, right. Might work for some Hondas, but not for mine or jstall7543's.  Thanks to all for the help!