spy alarm 2 way 5000m

why can't this work if I connect it like you said is the diagram they written wrong? I don't understand why they would sell something that won't work. if it don't work I'll try and get a refund get something better. The installers charging $300 and can't afford atm.=)

First have you a DMM or even (not recommended) a test light to test the unit's lock and unlock outputs? Have you tested the car's wiring you listed in your first post? If they're the right colours and test out OK but your alarm doesn't, do you honestly think any other part of this POS will work? Now you are probably finding out why they charge A$300 for this kind of work.

yes, I have tested the car door lock and unlock wires and it shows positive while doors are closed and negative while door is open. using a test light I tested the units white and the wht/blk , one on each end of the test light and nothing showing. Shold I test the wht with the wht/blk and yellow and yellow/blk?=)

It sounds like you have dome light triggers there, the door LOCKS are what we're talking about, with only the driver;s door open, the lock catch thrown over that door should lock and unlock using the key in the driver's door. Now take a ground wire ( preferably through a standard bulb type tester) to each in turn, that will tell us if you have the right vehicle wire. The alarm (POS) should give a neg pulse each time on it's white and WHITE/ black wires.

Ok I will test it tomorrow and see if I can find the correct door wires using the test light. no more q's from me it so late here! 3am lol=)

Ok I just went and tested the car door lock and unlock wires with a test light and it's the correct ones. When I grounded the wires they were locking and opening.=)

The trouble is I don't know which 2wires to use from the alarm for the doors. How should I test the alarm wires? If the car locks need negative triggers the I would need positive triggers from the alarm. Any help would be really appreciated.=)

Well now it's back YET AGAIN to wiring as the F2 diagram as I said originally, and seeing if you're getting a NEG pulse out of the white and WHITE/ black wires on lock and unlock.

hi again, I wired the wht to lock and wht/blk to unlock and nothing happens. I tested with DMM and it shows " - " 0.01-0.02 volts. =)

I read and found these diagram for neg door locks. because the alarm wires are not working when connecting directly to the car doors should I need a relay like these? I do have a small amount of voltage coming out of the wht and wht/blk wires. https://img827.imageshack.us/i/3wireposlocks.gif/ https://img13.imageshack.us/i/negrelays.gif/ thanks in advance=)