viper 5701 into a 2008 nissan titan

Sorry for the double post, I did not realize I could not paste from a word document.

I am having a hard time understanding the "flex relays" in the Viper 5701 and thought I would ask before I tear ino this project.

The Heavy guage H3 connector shows this....

PINK (+) IGNITION 1 INPUT/OUTPUT

2 RED / WHITE (30A) FUSED IGNITION 2 / FLEX RELAY INPUT 873 ORANGE ACCESSORY OUTPUT4 VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL WIRE)5 GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER KILL WIRE)6 RED (+) FUSED (30A) IGNITION 1 INPUT7 PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT8 PINK/BLACK FLEX RELAY INPUT 87A key side (if required) of FLEX RELAY9 RED / BLACK FUSED (30A) ACCESSORY/STARTER INPUT

I understand everything except powering my 2nd starter and 2nd accessory.  Do I need external relays or do I have the relays I need built in?

I also have the DEI XPRESSKIT TBXKEY UNIVERSAL TRANSPONDER BYPASS.  How does this interface with the Viper? 

If anyone has any pointers for a 2008 Titan feel free to pass them on.

Thanks all!

Dennis

from your post you will use everything but pink/black. for 2nd ACC & 2nd Starter you will need 2 relays and use the small gauge orange and purple from the harness that has them labeled as 2nd Starter & 2nd  ACC. My Directechs login isnt working right now or Id tell you exactly which harness these 2 wires are located