autostart using gsm module

Home / the12volt's Install Bay / Car Security and Convenience / autostart using gsm module (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

smokey1384

Member - Posts: 4

Joined: April 19, 2012

Location: Ontario, Canada

Posted: April 19, 2012 at 3:43 PM / IP Logged

Hey I have a 2371 Autostart unit and i want to install a GSM unit to start my car remotely via cellphone.

I have been looking at both the GSM-Auto module and the GSM-Relay unit on Ebay.

Is there a way to connect relay output to pulse some input wires on the Autostart unit?

I don't want to wreck the keyfob to use it's contacts?

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: April 22, 2012 at 3:10 AM / IP Logged

If i was looking at the correct manual you should have a purple wire on the 12 pin harness which is an external trigger wire.The gsm relay works well,you just have to make sure to get a quad band sim card to make it work.

Back to Top

smokey1384

Member - Posts: 4

Joined: April 19, 2012

Location: Ontario, Canada

Posted: April 25, 2012 at 7:23 AM / IP Logged

Purple wire may be okay but I think that says its an output.

Is this for triggering a start?

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: April 25, 2012 at 8:11 PM / IP Logged

no,it should be an input.

Back to Top

smokey1384

Member - Posts: 4

Joined: April 19, 2012

Location: Ontario, Canada

Posted: April 26, 2012 at 8:42 AM / IP Logged

Sorry but I have conflicting wiring schematics

One drawing v.2.01 says: 9-Purple (-)EXT.TRIGGER input

Other Drg. v.0.06 says: 9-Purple (-)EXT.TRIGGER output

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: April 26, 2012 at 8:58 AM / IP Logged

just ground the purple wire and see if it starts.

Back to Top

smokey1384

Member - Posts: 4

Joined: April 19, 2012

Location: Ontario, Canada

Posted: November 17, 2013 at 4:19 PM / IP Logged

No it didn't start. I believe it is disabled from the factory. Need to find out how to program this feature to work.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

autostart using gsm module

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.