viper bad locks?

Home / the12volt's Install Bay / Car Security and Convenience / viper bad locks? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bens300

Member - Posts: 12

Joined: December 22, 2003

Location: United States

Posted: December 09, 2012 at 2:57 PM / IP Logged

I bought a 5704 and got to the door lock part and...

Unlock works, sends a negative to the door unlock wire.

Lock doesnt work, it sends 3 volts out.

Any ideas whats up? Thanks in advance.

Ben

bens300

Member - Posts: 12

Joined: December 22, 2003

Location: United States

Posted: December 09, 2012 at 3:04 PM / IP Logged

Also its a 2009 Civic just to put it out there.

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: December 09, 2012 at 6:03 PM / IP Logged

Did you verify that you have the correct lock wire in the car... I show green in kick panel for lock...

bens300

Member - Posts: 12

Joined: December 22, 2003

Location: United States

Posted: December 09, 2012 at 6:14 PM / IP Logged

ive got the correct wires in the car. it s the alarm thats putting out 3 volts. it should be a negative pulse, right? The unlock wire from the alarm puts out a negative pulse and unlocks correctly.

soundnsecurity

Gold - Posts: 2,711

Joined: November 10, 2008

Location: Louisiana, United States

Posted: December 09, 2012 at 6:38 PM / IP Logged

actually a vipers outputs are positive and negative, each wire does both . the green lock wire is negative for lock but it is positive for unlock. are you testing the wire by itself or are you testing it while it is hooked to the cars lock wire?

Search for other posts by soundnsecurity

bens300

Member - Posts: 12

Joined: December 22, 2003

Location: United States

Posted: December 09, 2012 at 6:53 PM / IP Logged

im testing it unhooked from the vehicle. unlock gives me a negative pulse and lock give me a 3 volt pulse.

bens300

Member - Posts: 12

Joined: December 22, 2003

Location: United States

Posted: December 09, 2012 at 8:48 PM / IP Logged

Anyone? Its driving me crazy. Also the only output on the alarm for the trunk release is negative. Do i need to program it to change to positive or do i need a relay. The trunk release is positive in the car.

lucasoil4u

Copper - Posts: 317

Joined: May 11, 2009

Location: Minnesota, United States

Posted: December 14, 2012 at 9:27 AM / IP Logged

Relay for trunk release. Hook up the door lock and test it attached to the wire.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper bad locks?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.