the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

avital 5303 in a 07 suzuki forenza


Post ReplyPost New Topic
< Prev Topic Next Topic >
suzukiforenza 
Member - Posts: 29
Member spacespace
Joined: September 13, 2013
Posted: September 19, 2013 at 1:56 AM / IP Logged  
H4/2
BROWN
200mA (-) HORN OUTPUT
black -(horn switch)
would i just tap into the horn wire or use a relay since it has only a 200ma output
kreg357 
Platinum - Posts: 7,800
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: September 19, 2013 at 5:23 AM / IP Logged  
Yes, just a direct tap-in, no relay needed for the horn.
Soldering is fun!
chev104275 
Gold - Posts: 1,431
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: September 19, 2013 at 7:20 AM / IP Logged  
The dome light supervision wire is an option to have the alarm system control the dome light. The Door trigger is the wire that tells the alarm system when a door is opened.
If i Can't Install it    I Don't need it   Joe
suzukiforenza 
Member - Posts: 29
Member spacespace
Joined: September 13, 2013
Posted: September 20, 2013 at 12:52 AM / IP Logged  
H1/10
WHITE/ BLUE
REMOTE START (-) ACTIVATION INPUT
not sure
H1/12
ORANGE
(-) 500mA GROUND WHEN ARMED OUTPUT
not used
H2/1
LIGHT BLUE
200mA (-) 2nd UNLOCK OUTPUT
not used
H2/2
WHITE/ BLACK
200mA PROGRAMMABLE (-) AUX 2 OUTPUT
not used
H2/3
VIOLET/BLACK
(-) 200mA PROGRAMMABLE (-) AUX 1 OUTPUT
not used
H3/5
BLUE/WHITE
(-) STATUS OUTPUT
not used
H4/1
ORANGE / BLACK
200 mA PROGRAMMABLE (-) AUX 3 OUTPUT
not used
do i use the h3/5 or h1/10
suzukiforenza 
Member - Posts: 29
Member spacespace
Joined: September 13, 2013
Posted: September 20, 2013 at 12:57 AM / IP Logged  
what would the dome light supervision wire function be if what sets my dome light off is the door trigger. my dome light comes on when i open the doors of my car already
suzukiforenza 
Member - Posts: 29
Member spacespace
Joined: September 13, 2013
Posted: September 20, 2013 at 1:04 AM / IP Logged  
when i do the relay for
H1/1        use relay
RED / WHITE
(-) 200mA TRUNK RELEASE OUTPUT
brown (driver kick pannel)
what size fuse should be on the constant +12 volt
chev104275 
Gold - Posts: 1,431
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: September 20, 2013 at 9:01 AM / IP Logged  
I would put a 10amp in there. you could always measure the current draw and fuse it accordingly.
If i Can't Install it    I Don't need it   Joe
suzukiforenza 
Member - Posts: 29
Member spacespace
Joined: September 13, 2013
Posted: September 20, 2013 at 4:30 PM / IP Logged  
Do I use h3/5    or h 1/10
chev104275 
Gold - Posts: 1,431
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: September 20, 2013 at 4:37 PM / IP Logged  
H1/10 is used to activate the remote start from an external source - isn't needed for a basic install
H3/5 has variety of uses but for a basic system you don't need it
If i Can't Install it    I Don't need it   Joe
suzukiforenza 
Member - Posts: 29
Member spacespace
Joined: September 13, 2013
Posted: September 25, 2013 at 11:36 PM / IP Logged  
i changed my mind and went with the Excalibur al 1850 edpb. sorry about all the trouble
the horn has a built in relay
Violet/Black Wire - Horn Relay N/O (+/-) Input
not sure
Blue/Black Wire - Horn Relay COM Output
not sure
BROWN / Black Wire - Horn Relay N/C Input
not sure
wasnt sure how to wire it up.
White Wire - Alarm Arm (-) Input
not sure
Brown Wire - Alarm Disarm (-) Input
not sure
these two are if i want a specific device to arm or disarm my car correct?
Page of 5

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, September 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer