the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

09 g6 , 5704v doesn't crank long enough


Post ReplyPost New Topic
< Prev Topic Next Topic >
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: December 01, 2013 at 5:03 PM / IP Logged  
Do you have H3/9 connected to a 12 volt source? That is the input for the Accessory output(H3/3).
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
kylehondarider 
Member - Posts: 20
Member spacespace
Joined: November 07, 2010
Location: Minnesota, United States
Posted: December 01, 2013 at 5:36 PM / IP Logged  
Correct. I believe something is up with the dball since that is what sends the start output. I'm so dumbfounded over this. I may try an idatalink module instead.
kylehondarider 
Member - Posts: 20
Member spacespace
Joined: November 07, 2010
Location: Minnesota, United States
Posted: December 02, 2013 at 4:53 PM / IP Logged  
For some reason disconnecting the Accessory wire from the remote start module to the car fixed the problem. Everything seems to be functional now!
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: December 02, 2013 at 5:46 PM / IP Logged  
Very odd. Does the heater fan work during remote start without the Accessory wire disconnected?
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
kylehondarider 
Member - Posts: 20
Member spacespace
Joined: November 07, 2010
Location: Minnesota, United States
Posted: December 06, 2013 at 12:21 AM / IP Logged  
Yes, everything seems to be functioning normally. Quite odd.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer