xpressstart one unlock before start

Installed a XpressStart One in a '14 Tundra. The unlock feature will not work while the remote start function has been triggered. Is there a way in the settings to either make it automatically unlock before starting or to enable the unlock function while the truck is running?

Try this: POWER LOCK       WHITE (TYPE B)       in DRIVERS KICK PANEL, (BLUE, 17-Pin Plug) Pin 7       **Connect pin 15 on the 18 pin white connector on the XpressStart One to this wire** POWER UNLOCK       RED (TYPE B)       in DRIVERS KICK PANEL, (BLUE, 17-Pin Plug) Pin 6 **Connect pin 7 on the 18 pin white connector on the XpressStart One to this wire** I would meter the wires above to make sure they 'light up' when you press the lock/unlock button on the door. This is using XpressStart One's lock/unlock output wires to override the CAN message sent to the BCM. No question is stupid or not worth asking. You were once a noob, right? :)