Autopage RS-603A troubleshooting

Home / the12volt's Install Bay / Car Security and Convenience / Autopage RS-603A troubleshooting

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nailerdog

Member - Posts: 1

Joined: January 26, 2017

Location: Wisconsin, United States

Posted: January 26, 2017 at 10:45 PM / IP Logged

Replacing a fried RS-603 with a new RS-603A as a basic start and lock activation system in a 1996 Ford F-250. Looked to be plug and play with a little re-programming. Remotes paired up fine and the locks work fine. During the RPM learning the LED came on and wouldn't turn off. I have tried a factory reset and it still won't go off. Also tried a total disconnect. Thought it may be in valet mode somehow so I followed the procedure for canceling that as well with no luck. Guessing I missed something and its in a locked mode of some sort?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.